No abstract

Selective thermal emission in a useful range of energies from a material operating at high temperatures is required for effective solar thermophotovoltaic energy conversion. Three-dimensional metallic photonic crystals can exhibit spectral emissivity that is modified compared with the emissivity of unstructured metals, resulting in an emission spectrum useful for solar thermophotovoltaics. However, retention of the three-dimensional mesostructure at high temperatures remains a significant challenge. Here we utilize self-assembled templates to fabricate high-quality tungsten photonic crystals that demonstrate unprecedented thermal stability up to at least 1,400°C and modified thermal emission at solar thermophotovoltaic operating temperatures. We also obtain comparable thermal and optical results using a photonic crystal comprising a previously unstudied material, hafnium diboride, suggesting that refractory metallic ceramic materials are viable candidates for photonic crystal-based solar thermophotovoltaic devices and should be more extensively studied.

Spectral control of the emissivity of surfaces is essential in applications such as solar thermal and thermophotovoltaic energy conversion in order to achieve the highest conversion efficiencies possible. We investigated the spectral performance of planar aperiodic metal-dielectric multilayer coatings for these applications. The response of the coatings was optimized for a target operational temperature using needle-optimization based on a transfer matrix approach. Excellent spectral selectivity was achieved over a wide angular range. These aperiodic metal-dielectric stacks have the potential to significantly increase the efficiency of thermophotovoltaic and solar thermal conversion systems. Optimal coatings for concentrated solar thermal conversion were modeled to have a thermal emissivity <7% at 720K while absorbing >94% of the incident light. In addition, optimized coatings for solar thermophotovoltaic applications were modeled to have thermal emissivity <16% at 1750K while absorbing >85% of the concentrated solar radiation.

The control of thermal radiation is of great current importance for applications such as energy conversions and radiative cooling. Here we show theoretically that the thermal emission of a finite-size blackbody emitter can be enhanced in a thermal extraction scheme, where one places the emitter in optical contact with an extraction device consisting of a transparent object, as long as both the emitter and the extraction device have an internal density of state higher than vacuum, and the extraction device has an area larger than the emitter and moreover has a geometry that enables light extraction. As an experimental demonstration of the thermal extraction scheme, we observe a four-fold enhancement of the far-field thermal emission of a carbon-black emitter having an emissivity of 0.85.

Spectral control of the emissivity of surfaces is essential for efficient conversion of solar radiation into heat. We investigated surfaces consisting of sub-wavelength V-groove gratings coated with aperiodic metal-dielectric stacks. The spectral behavior of the coated gratings was modeled using rigorous coupled-wave analysis (RCWA). The proposed absorber coatings combine impedance matching using tapered metallic features with the excellent spectral selectivity of aperiodic metal-dielectric stacks. The aspect ratio of the V-groove can be tailored in order to obtain the desired spectral selectivity over a wide angular range. Coated V-groove gratings with optimal aspect ratio are predicted to have thermal emissivity below 6% at 720K while absorbing >94% of the incident light. These sub-wavelength gratings would have the potential to significantly increase the efficiency of concentrated solar thermal systems.