Metal-organic frameworks (MOFs) are a new and growing area of materials with high porosity and customizability. UiO-66, a zirconium-based MOF, has shown much interest to the military because of the ability of the MOF to catalytically decontaminate chemical warfare agents (CWAs). Unfortunately, the applications for MOFs are limited because of their powder form, which is difficult to incorporate into protective clothing. As a result, a new area of research has developed to functionalize fabrics with MOFs to make a wearable multifunctional fabric that retains the desired properties of the MOF. In this work, UiO-66 was incorporated into poly(vinylidene) fluoride/Ti(OH) composite fabric using electrospinning and evaluated for its use in chemical protective clothing. The base triethanolamine (TEA) was added to the composite fabric to create a self-buffering system that would allow for catalytic decontamination of CWAs without the need for a buffer solution. The fabrics were tested against the simulants methyl-paraoxon (dimethyl (4-nitrophenyl) phosphate, DMNP), diisopropyl fluorophosphate (DFP), and the nerve agent soman (GD). The results show that all of the samples have high moisture vapor transport and filtration efficiency, which are desirable for protective clothing. The incorporation of TEA decreased air permeation of the fabric, but increased the catalytic activity of the composite fabric against DMNP and DFP. Samples with and without TEA have rapid half-lives ( t) as short as 35 min against GD agent. These new catalytically active self-buffering multifunctional fabrics have great potential for application in chemical protective clothings.

Currently, air permeable chemical/biological (CB) protective garments are based on activated carbon technology, which reduces moisture vapor transport needed for evaporative cooling and has potential to absorb and concentrate toxic materials. Researchers are exploring classes of sorbent materials that can selectively accumulate and decompose target compounds for potential to enhance protective suits and allow for novel filtration devices. Here, the metal–organic frameworks (MOFs) UiO-66-NH2 and HKUST-1 have been identified as such materials. To better understand how MOFs can perform in future CB protective systems, atomic layer deposition (ALD) and solution deposition were used to modify nonwoven polypropylene and flame-resistant fabrics with HKUST-1 and UiO-66-NH2. Air permeation, water vapor transport, filtration efficiency, and chemical reactivity against chemical agent simulants were assessed in relation to ALD thickness and MOF crystal size. MOF deposition on substrates decreased both air and chemical permeation while increasing filtration efficiency and chemical sorption. Moisture vapor transport was not affected by MOF growth on substrates, which is promising when considering thermal properties of protective garments. Future work should continue to explore how MOF deposition onto fiber and textile substrates impacts transport properties and chemical absorbance.