In this study, a preload monitoring method using impedance signatures obtained from a piezoelectric-based smart interface is presented for bolted girder connections. Firstly, the background theory of the piezoelectric-based smart interface and its implementation into the health monitoring of bolted connections are outlined. A simplified electro-mechanical (EM) impedance model of a smart interface-embedded bolted connection system is formulated to interpret a mechanistic understanding of the EM impedance signatures under the effect of bolt preload. Secondly, finite element modeling of a bolted connection is carried out to show the numerical feasibility of the presented method, and to predetermine the sensitive frequency band of the impedance signatures. Finally, impedance measurements are conducted on a lab-scaled bolted girder connection, to verify the predetermined sensitive frequency range and to assess the bolt preload changes in the test structure.

For a structural health monitoring (SHM) system, the operational functionality of sensors is critical for successful implementation of a damage identification process. This study presents experimental and analytical investigations on sensor fault diagnosis for impedance-based SHM using the piezoelectric interface technique. Firstly, the piezoelectric interface-based impedance monitoring is experimentally conducted on a steel bolted connection to investigate the effect of structural damage and sensor defect on electromechanical (EM) impedance responses. Based on the experimental analysis, sensor diagnostic approaches using EM impedance features are designed to distinguish the sensor defect from the structural damage. Next, a novel impedance model of the piezoelectric interface-driven system is proposed for the analytical investigation of sensor fault diagnosis. Various parameters are introduced into the EM impedance formulation to model the effect of shear-lag phenomenon, sensor breakage, sensor debonding, and structural damage. Finally, the proposed impedance model is used to analytically estimate the change in EM impedance responses induced by the structural damage and the sensor defect. The analytical results are found to be consistent with experimental observations, thus evidencing the feasibility of the novel impedance model for sensor diagnosis and structural integrity assessment. The study is expected to provide theoretical and experimental foundations for impedance monitoring practices, using the piezoelectric interface technique, with the existence of sensor faults.

Summary An important issue in impedance‐based damage monitoring is to deploy sensors in proper positions in which damage‐sensitive impedance responses can be captured effectively. In this study, a full‐scale multi‐strand anchorage is analyzed to determine optimal locations of piezoelectric sensors for impedance‐based monitoring of locally damaged strands. First, stress variations of the multi‐strand anchorage are experimentally measured to estimate the anchorage behavior under the effect of locally damaged strands. Strain signals are examined for axial, circumferential, and radial stress components under the variation of prestress forces. Second, a finite element analysis is made on the multi‐strand anchorage to back up the experimental findings. Third, a damage‐sensitive structural model is interpreted for the local strand breakage. Finally, impedance responses sensitive to local strand breakage are experimentally examined for a few scenarios simulated in the anchorage system. PZT (lead zirconate titanate) sensors deployed on the anchor head and the bearing plate are evaluated to comparatively determine ideal regions of interest for impedance monitoring. The results show that the greater stress variation yields the greater variations in impedance responses and the near‐top and near‐anchor heads are ideal regions of interest for damage‐sensitive impedance monitoring.

In this paper, a piezoelectric sensor-embedded smart rock is proposed for the electromechanical impedance monitoring of internal concrete damage in a prestressed anchorage zone. Firstly, a piezoelectric sensor-embedded smart rock is analyzed for impedance monitoring in concrete structures. An impedance measurement model is analyzed for the PZT (lead zirconate titanate)-embedded smart rock under compression in a concrete member. Secondly, a prototype of the smart rock embedded with a PZT sensor is designed in order to ascertain, sensitively, the variations of the impedance signatures induced by concrete damage in an anchorage zone. Thirdly, the performance of the smart rock is estimated from a numerical analysis and experimental tests. Variations in the impedance signals under compressive test cases are analyzed in order to predetermine the sensitive frequency band for the impedance monitoring. Lastly, an experiment on an anchorage zone embedded with the smart rocks and surface-mounted PZT sensors is conducted for the impedance measurement under a series of loading cases. The impedance variations are quantified in order to comparatively evaluate the feasibility of the sensor-embedded smart rock for the detection of internal concrete damage in the anchorage zone. The results show that the internal concrete damage was successfully detected using the PZT-embedded smart rock, thus enabling the application of the technique for anchorage zone health monitoring.

This study investigates the feasibility of impedance-based stress monitoring method for local-strand breakage detection in multi-strand anchorage systems. Firstly, stress fields of a multi-strand anchorage system are numerically analyzed to examine anchorage’s responses sensitive to local strand breakage. Secondly, an impedance-based stress monitoring technique via the PZT interface is outlined. Thirdly, a novel hoop-type PZT interface is designed for the multi-strands anchorage to monitor the stress variation induced by the strand breakage. Local dynamic responses of the hoop-type PZT interface are analyzed to predetermine the effective frequency ranges. Finally, the numerical feasibility of the proposed method is verified on a seven-strand anchorage system under various strand breakage cases. Variations in impedance responses are statistically quantified, and broken strands are localized by linear tomography analysis of damage indices. A lab-scale experiment is also conducted on a multi-strands anchorage to evaluate the realistic performance of the hoop PZT interface for impedance-based stress monitoring method.

This study investigates the feasibility of smart aggregate (SA) sensors and their optimal locations for impedance-based damage monitoring in prestressed concrete (PSC) anchorage zones. Firstly, numerical stress analyses are performed on the PSC anchorage zone to determine the location of potential damage that is induced by prestressing forces. Secondly, a simplified impedance model is briefly described for the SA sensor in the anchorage. Thirdly, numerical impedance analyses are performed to explore the sensitivities of a few SA sensors in the anchorage zone under the variation of prestressing forces and under the occurrence of artificial damage events. Finally, a real-scale PSC anchorage zone is experimentally examined to evaluate the optimal localization of the SA sensor for concrete damage detection. Impedance responses measured under a series of prestressing forces are statistically quantified to estimate the performance of damage monitoring via the SA sensor in the PSC anchorage.

In this study, a preload monitoring method using impedance signatures obtained from a piezoelectric-based smart interface is presented for bolted girder connections. Firstly, the background theory of the piezoelectric-based smart interface and its implementation into health monitoring of bolted connections are outlined. A simplified electro-mechanical (EM) impedance model of a smart interface-embedded bolted connection system is formulated to interpret mechanistic understanding of EM impedance signatures under the effect of bolt preload. Secondly, finite element modeling of a bolted connection is carried out to show the numerical feasibility of the presented method and to predetermine the sensitive frequency band of impedance signatures. Finally, impedance measurements are conducted on a lab-scaled bolted girder connection to verify the predetermined sensitive frequency range and to assess the bolt preload changes in the test structure.

For impedance-based damage detection practices, the sensing range of piezoelectric devices is an important parameter that should be determined before real implementations. This study presents numerical and experimental analyses for characterizing the sensing region of a smart PZT (lead–zirconate–titanate) interface for damage monitoring in plate-like structures. First, a finite element (FE) model of the PZT interface mounted on a plate structure is established. The impedance responses of the PZT interface are numerically simulated under different damage locations inflicted in the plate domain. The impedance features are extracted from the impedance signatures to analyze the sensing distance and the damage detectability of the PZT interface. Next, the splice plate of a bolted connection is selected as a practical plate-like structure for the experimental examination of the PZT interface’s sensing region on a limited plate domain. The damage sensitivity behavior of the PZT interface is analyzed with respect to the damage location on the splice plate. An FE analysis of the corresponding PZT interface-splice plate system is also conducted to support the experimental results.