Sentinel-1 (S-1) has an unparalleled mapping capacity. In interferometric wide swath (IW) mode, three subswaths imaged in the novel Terrain Observation by Progressive Scans (TOPS) SAR mode result in a total swath width of 250 km. S-1 has become the European workhorse for large area mapping and interferometric monitoring at medium resolution. The interferometric processing of TOPS data however requires special consideration of the signal properties, resulting from the ScanSAR-type burst imaging and the antenna beam steering in azimuth. The high Doppler rate in azimuth sets very stringent coregistration requirements, making the use of enhanced spectral diversity (ESD) necessary to obtain the required fine azimuth coregistration accuracy. Other unique aspects of processing IW data, such as azimuth spectral filtering, image resampling, and data deramping and reramping, are reviewed, giving a recipe-like description that enables the user community to use S-1 IW mode repeat-pass SAR data. Interferometric results from S-1A are provided, demonstrating the mapping capacity of the S-1 system and its interferometric suitability for geophysical applications. An interferometric evaluation of a coherent interferometric pair over Salar de Uyuni, Bolivia, is provided, where several aspects related to coregistration, deramping, and synchronization are analyzed. Additionally, a spatiotemporal evaluation of the along-track shifts, which are directly related to the orbital/instrument timing error, measured from the SAR data is shown, which justifies the necessity to refine the azimuth shifts with ESD. The spatial evaluation indicates high stability of the azimuth shifts for several slices of a datatake.

No abstract

No abstract

No abstract

Sentinel-1B is the second of two C-Band Synthetic Aperture Radar (SAR) satellites of the Sentinel-1 mission, launched in April 2016-two years after the launch of the first satellite, Sentinel-1A. In addition to the commissioning of Sentinel-1B executed by the European Space Agency (ESA), an independent system calibration was performed by the German Aerospace Center (DLR) on behalf of ESA. Based on an efficient calibration strategy and the different calibration procedures already developed and applied for Sentinel-1A, extensive measurement campaigns were executed by initializing and aligning DLR's reference targets deployed on the ground. This paper describes the different activities performed by DLR during the Sentinel-1B commissioning phase and presents the results derived from the analysis and the evaluation of a multitude of data takes and measurements.