Abstract. An algorithm developed to map flooded areas from synthetic aperture radar imagery is presented in this paper. It is conceived to be inserted in the operational flood management system of the Italian Civil Protection and can be used in an almost automatic mode or in an interactive mode, depending on the user's needs. The approach is based on the fuzzy logic that is used to integrate theoretical knowledge about the radar return from inundated areas taken into account by means of three electromagnetic scattering models, with simple hydraulic considerations and contextual information. This integration aims at allowing a user to cope with situations, such as the presence of vegetation in the flooded area, in which inundation mapping from satellite radars represents a difficult task. The algorithm is designed to work with radar data at L, C, and X frequency bands and employs also ancillary data, such as a land cover map and a digital elevation model. The flood mapping procedure is tested on an inundation that occurred in Albania on January 2010 using COSMO-SkyMed very high resolution X-band SAR data.

No abstract

No abstract

The use of synthetic aperture radar (SAR) data is presently well established in operational services for flood management. Nevertheless, detecting inundated vegetation and urban areas still represents a critical issue, because the radar signatures of these targets are often ambiguous. This paper analyzes the role of the interferometric coherence in complementing intensity SAR data for mapping floods in agricultural and urban environments. The advantages of the joint use of intensity and coherence are first discussed in a theoretical way and then verified on a case study, namely, the flood that hit the Emilia-Romagna region (Northern Italy) in January 2014. The short revisit time of the COSMO-SkyMed images, as well as a dedicated acquisition plan tailored to the requirements of the Italian Civil Protection Department, has allowed us to build a data set of radar interferometric observations of the event. Results show that the analysis of the multitemporal trend of the coherence is useful for the interpretation of SAR data since it enables a considerable reduction of classification errors that could be committed considering intensity data only. Interferometric data have permitted us to distinguish zones where water receded from areas where it persisted for a longer time and, in one case, to measure changes of water level

Soil moisture content (SMC) and above-ground biomass (AGB) are key parameters for the understanding of both the hydrological and carbon cycles. From an economical perspective, both SMC and AGB play a significant role in the agricultural sector, one of the most relevant markets worldwide. This paper assesses the sensitivity of Global Navigation Satellite System (GNSS) reflected signals to soil moisture and vegetation biomass from an experimental point of view. For that, three scientific flights were performed in order to acquire GNSS reflectometry (GNSS-R) polarimetric observations over a wide range of terrain conditions. The GNSS-R data were used to obtain the right-left and right-right reflectivity components, which were then georeferenced according to the transmitting GNSS satellite and receiver positions. It was determined that for low-altitude GNSS-R airborne platforms, the reflectivity polarization ratio provides a highly reliable observable for SMC due to its high stability with respect to surface roughness. A correlation coefficient r2 of 0.93 and a sensitivity of 0.2 dB/SMC (%) were obtained for moderately vegetated fields with a surface roughness standard deviation below 3 cm. Similarly, the copolarized reflection coefficient shows a stable sensitivity to forest AGB with r2 equal to 0.9 with a stable sensitivity of 1.5 dB/(100 t/ha) up to AGB values not detectable by other remote sensing systems. © 2014 IEEE

This paper presents an automatic algorithm for mapping floods. Its main characteristic is that it can detect not only inundated bare soils, but also floodwater in urban areas. The synthetic aperture radar (SAR) observations of the flood that hit the city of Houston (Texas) following the landfall of Hurricane Harvey in 2017 are used to apply and validate the algorithm. The latter consists of a two-step approach that first uses the SAR data to identify buildings and then takes advantage of the Interferometric SAR coherence feature to detect the presence of floodwater in urbanized areas. The preliminary detection of buildings is a pre-requisite for focusing the analysis on the most risk-prone areas. Data provided by the Sentinel-1 mission acquired in both Strip Map and Interferometric Wide Swath modes were used, with a geometric resolution of 5 m and 20 m, respectively. Furthermore, the coherence-based algorithm takes full advantage of the Sentinel-1 mission’s six-day repeat cycle, thereby providing an unprecedented possibility to develop an automatic, high-frequency algorithm for detecting floodwater in urban areas. The results for the Houston case study have been qualitatively evaluated through very-high-resolution optical images acquired almost simultaneously with SAR, crowdsourcing points derived by photointerpretation from Digital Globe and Federal Emergency Management Agency’s (FEMA) inundation model over the area. For the first time the comparison with independent data shows that the proposed approach can map flooded urban areas with high accuracy using SAR data from the Sentinel-1 satellite mission.

In case of a seismic event, a fast and draft damage map of the hit urban areas can be very useful, in particular when the epicentre of the earthquake is located in remote regions, or the main communication systems are damaged. Our aim is to analyse the capability of remote sensing techniques for damage detection in urban areas and to explore the combined use of radar (SAR) and optical satellite data. Two case studies have been proposed: Izmit (1999; Turkey) and Bam (2003; Iran). Both areas have been affected by strong earthquakes causing heavy and extended damage in the urban settlements close to the epicentre. Different procedures for damage assessment have been successfully tested, either to perform a pixel by pixel classification or to assess damage within homogeneous extended areas. We have compared change detection capabilities of different features extracted from optical and radar data, and analysed the potential of combining measurements at different frequency ranges. Regarding the Izmit case, SAR features alone have reached 70% of correct classification of damaged areas and 5 m panchromatic optical images have given 82%; the fusion of SAR and optical data raised up to 89% of correct pixel-to-pixel classification. The same procedures applied to the Bam test case achieved about 61% of correct classification from SAR alone, 70% from optical data, while data fusion reached 76%. The results of the correlation between satellite remote sensing and ground surveys data have been presented by comparing remotely change detection features averaged within homogeneous blocks of buildings with ground survey data

GEROS-ISS stands for GNSS REflectometry, radio occultation, and scatterometry onboard the International Space Station (ISS). It is a scientific experiment, successfully proposed to the European Space Agency in 2011. The experiment as the name indicates will be conducted on the ISS. The main focus of GEROS-ISS is the dedicated use of signals from the currently available Global Navigation Satellite Systems (GNSS) in L-band for remote sensing of the Earth with a focus to study climate change. Prime mission objectives are the determination of the altimetric sea surface height of the oceans and of the ocean surface mean square slope, which is related to sea roughness and wind speed. These geophysical parameters are derived using reflected GNSS signals (GNSS reflectometry, GNSS-R). Secondary mission goals include atmosphere/ionosphere sounding using refracted GNSS signals (radio occultation, GNSS-RO) and remote sensing of land surfaces using GNSS-R. The GEROS-ISS mission objectives and its design, the current status, and ongoing activities are reviewed and selected scientific and technical results of the GEROS-ISS preparation phase are described.