AISI 1070 steel is a material that has corrosion when it reacts with the environment. One way to inhibit the corrosion rate is by using organic inhibitors. The organic inhibitors used mango leaves and mango rinds with variations in the concentration of organic inhibitors of 0%, 6%, and 8%, respectively. This study aimed to determine the effectiveness of mango leaf extract and mango rinds as an inhibitor against the corrosion rate of AISI 1070 Steel. The extraction was carried out using the Maceration Method. Fourier Transform Infrared (FTIR), Potenzyodinamic, and Weight Loss tests were carried out in this study. FTIR results show that both mango rinds and mango leaf have ingredients that were able to inhibit the corrosion rate, such as flavonoid functional groups including C – H, C = O, and C – O. Using the weight-loss method, the best corrosion rate was found in the mango rinds extract with a concentration of 8 mL, which was 31.784 mm/year with an inhibition efficiency of 92%. The highest corrosion rate was in 2M H2SO4 solution using potentiodynamic, without a mixture of inhibitors, that is 0.15589478 mm/year.
Dies merupakan salah satu peralatan dalam dunia manufaktur yang dipilih karena kecepatannya dalam menghasilkan produk seragam dengan kapasitas produksi sangat besar. Salah satu industri pengguna dies yang paling banyak adalah manufaktur otomotif pada bagian bodi (karoseri). Perkembangan industri jenis ini berkembang sangat pesat di Indonesia dan menopang pereknomian. Bagian bodi dari produk otomotif terdiri dari beberapa bagian. Salah satu bagian bodi ini bernama fender. Fender merupakan bagian bodi yang melingkupi komponen roda. Pada makalah ini, objek dari penelitian adalah pemilihan pegas sebagai langkah pada proses perancangan dies pembentuk fender truk. Pegas ini berfungsi untuk menjamin besar gaya yang harus diberikan agar pelat yang dipotong dapat menghasilkan fender yang sesuai. Gaya rata-rata yang dibutuhkan adalah 216,84 kgf. Kajian akan dilakukan dengan menggunakan pendekatan teoritik yang kemudian dimasukkan ke dalam perangkat lunak. Kajian ini memberikan alternatif cara pemilihan pegas pada komponen dies. Berdasarkan hasil kajian maka dipilih pegas berjenis SWM. Spesifikasi pegas sebagai berikut: diameter 40 mm, panjang 45 mm dengan konstanta pegas 22,2 kgf/mm. Jumlah pegas yang diperlukan adalah 6.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.