The sulfur–iodine thermochemical water-splitting cycle is a promising route proposed for hydrogen production. The decomposition temperature remains a challenge in the process. Catalysts, such as Pd supported on Al2O3, are being considered to decrease reaction temperatures. However, little is known regarding the kinetic behavior of such systems. In this work, zinc sulfate thermal decomposition was studied through non-isothermal thermogravimetric analysis to understand the effect of a catalyst within the sulfur–iodine reaction system context. The findings of this analysis were also related to a thermodynamic assessment. It was observed that the presence of Pd/Al2O3 modified the reaction mechanism, possibly with some intermediate reactions that were suppressed or remarkably accelerated. The proposed model suggests that zinc sulfate transformation occurred in two sequential stages without the Pd-based material. Activation energy values of 238 and 368 kJ.mol−1 were calculated. In the presence of Pd/Al2O3, an activation energy value of 204 kJ.mol−1 was calculated, which is lower than observed previously.

The sulfur related thermochemical water-splitting cycles are an important class of chemical processes considered for hydrogen production. Recently, the magnesium sulfate thermal decomposition has been reported as a potential unit operation in one of these cycles. Therefore, some interest has been observed in the use of catalysts to lower the activation energy of such reactions. In this context, the present manuscript reports the thermodynamics and kinetics modeling results associated with this reaction system in the presence of a Pd catalyst supported over γ-Al 2 O 3 . The presence of such species is responsible for shifting the decomposition temperature to lower values in at least 100 °C. It was observed that the magnesium content is still oriented towards MgO formation. The obtained results indicate that the Pd/Al 2 O 3 catalyst could be a good alternative in reducing the thermal decomposition temperature as its presence was responsible for diminishing the process activation energy from 368.2 to 258.8 kJ.mol −1 .