International audienceThe flow rates along the interface between damaged geomembranes (GM) and geosynthetic clay liners (GCL) placed on top of a compacted clay liner (CCL) were measured by means of laboratory tests performed with an apparatus especially designed for this purpose. The tests performed were aimed at verifying the influence of the structural and material properties of the GCL on the transmissivity along the GM–GCL interface and flow rates through composite liners. Four types of GCLs with two different bonding processes (stitch-bonded or needle-punched) and different bentonites (natural sodium or natural calcium) were tested. The results obtained showed no significant differences among flow rate versus time in most of the tests performed, especially after the steady-state conditions of flow were reached. An analytical solution was employed to estimate the transmissivity of the GM–GCL interfaces. This solution also allowed predictions of flow rates and radius of wetted areas for typical configurations of composite liners in the field. The results obtained showed little influence of the nature of the bentonite and the predominance of the presence of preferential flow paths between the geomembrane and the GCL surface on the transmissivity of GM–GCL interfaces and flow rates through composite liners
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.