No abstract

To meet the augmented load power demand, the doubly-fed induction generator (DFIG) based wind electrical power conversion system (WECS) is a better alternative. Further, to enhance the power flow capability and raise security margin in the power system, the STATCOM type FACTS devices can be adopted as an external reactive power source. In this paper, a three-level STATCOM coordinates the system with its dc terminal voltage is connected to the common back-to-back converters. Hence, a lookup table-based control scheme in the outer control loops is adopted in the Rotor Side Converter (RSC) and the grid side converter (GSC) of DFIG to improve power flow transfer and better dynamic as well as transient stability. Moreover, the DC capacitor bank of the STATCOM and DFIG converters connected to a common dc point. The main objectives of the work are to improve voltage mitigation, operation of DFIG during symmetrical and asymmetrical faults, and limit surge currents. The DFIG parameters like winding currents, torque, rotor speed are examined at 50%, 80% and 100% comparing with earlier works. Further, we studied the DFIG system performance at 30%, 60%, and 80% symmetrical voltage dip. Zero-voltage fault ride through is investigated with proposed technique under symmetrical and asymmetrical LG fault for super-synchronous (1.2 p.u.) speed and sub-synchronous (0.8 p.u.) rotor speed. Finally, the DFIG system performance is studied with different phases to ground faults with and without a three-level STATCOM. INDEX TERMSDoubly-fed induction generator (DFIG), field oriented control (FOC), common-capacitor based STATCOM, voltage compensation, balanced and unbalanced faults, zero-voltage fault ride through.

<span>In distribution system, wind power plants are becoming popular renewable energy sources. It employs Doubly Fed Induction Generator (DFIG) to generate power based on wind conversion. Short and long transmission lines, presence of faults and presence of Static Synchronous Compensator (STATCOM) are highlighted issues in this paper. Basically, this research develops investigations on some electrical variables such as voltage and current to control them. Distribution Static Synchronous Compensator (DSTATCOM) is proposed in this paper. Wind farm acts as a source while DSTATCOM is connected to the distribution system with a DFIG based wind farm. The controller proposed is DSTATCOM is modeled and simulated in MATLAB/SIMULINK and the results are given. A microgrid based small signal analysis is performed in the laboratory using MATLAB and different comparisons are made and simulation case studies are presented and validated.</span>

<span>Voltage-source converter (VSC) topology is widely used for grid interfacing of distributed generation (DG) systems such as the photovoltaic system (PV). Since the operation of the VSC is essential to ensure quality of active and reactive power injected to the grid, a control approach is needed to deal with the uncertainties in the grid such as faults. This paper presents a non-linear controller design for a three-phase voltage source converter (VSC). The dynamic variables adopted for the VSC are the instantaneous real and reactive power components. The control approach that interface the VSC between the PV system and the grid are subjected to the current-voltage based. PV system injects active power to the grid and local load while utility grid monitors the power compensation of load reactive power. The proposed non-linear control strategy is implemented for the VSC to ensure fast error tracking and finite convergence time. The adaptive nature of the proposed non-linear control provides more robustness, less sluggish fault recovery compared to conventional PI control. The comprehensive numerical model is demonstrated in MATLAB script environment with power system disturbances such as faults in the grid. The simulation of proposed system is being carried out in MATLAB/SIMULINK environment to validate the control scheme. The proposed control system regulates the VSC ac side real and reactive power component and the dc side voltage.</span>

Scope of the Journal IJPEC highlights the latest trends in research in the field of power generation, transmission and distribution. Nowadays, there exist significant challenges in the power sector, particularly in the emerging electricity markets. A key challenge to the operation, control and protection of the power system is due to the proliferation of power electronic devices in the power systems. The main thrust of IJPEC is to bring out the latest research trends in the power sector as well as in energy conversion technologies. Contents IJPEC publishes original papers, review papers, technical reports, and case studies.

Power Quality (PQ) measurements and auditing play a vital role for smart grid applications, industrial safety and reliability. The major electrical PQ characteristics and parameters, like Voltage Sags/Swells, Harmonic Distortion, Voltage Unbalance, Voltage Variation & Flicker, and Supply Interruptions, are studied with the aim of maintaining the international or national standards. The electrical characteristics are studied and analyzed for single-phase and poly-phase systems in this IEEE 1159 recommended practice. The significant PQ constraints and parameters, like electromagnetic interference phenomenon deviation from the regular operation due to load equipment or source to load interaction, are described. Further, it is discussed PQ different monitoring devices, roles, and applications. In this paper, power quality monitoring of the equipment using FLUKE instrument and accessories to identify the equipment performance, audit, PQ issues are discussed practically for a two-panel boards switchgear equipment as a case study in Malaysia. Here, trends in voltage and current changes with current imbalances were observed on 1st May 2019 morning 8'o clock and on 7th May 2019 evening at 9'0 clock.

No abstract

In distribution system, wind power plants are becoming popular renewable energy sources. It employs Doubly Fed Induction Generator (DFIG) to generate power constructed on wind conversion. Short and long transmission lines, presence of faults and presence of Static Synchronous Compensator (STATCOM) are highlighted issues in this paper. Basically, this research develops investigations on some electrical variables such as voltage and current to control them. Distribution Static Synchronous Compensator (DSTATCOM) is proposed in this paper. Wind farm acts as a source while DSTATCOM is associated with the distribution system with a DFIG based wind farm. The controller proposed is DSTATCOM is modeled and simulated in MATLAB/SIMULINK and the results are given. A microgrid based small signal analysis is performed in the laboratory using MATLAB and different comparisons are made and simulation case studies are presented and validated.