The contamination of water resources by heavy metals, mainly introduced by anthropogenic resources, has been considered as a serious environmental issue in the recent era. Therefore, the conventional methods for heavy metal removal have various drawbacks in terms of cost, toxicity, and efficiency. The novel study investigated the biosorption intensity of raw and chemically modified sawdust and corn husk to eliminate chromium (III) from the aqueous solutions. Sawdust (SD) and corn husk (CH) were used as biosorbents and were treated chemically with sulfuric acid (H2SO4); sodium hydroxide (NaOH), and detergent powder. The biosorption potential was estimated based on percentage removal efficiency (% RE) of chromium (III) and the adsorption intensity (qmax). The characterization of surface morphology and functional groups of biosorbents was studied by SEM and FTIR. Moreover, the adsorption isotherm models (Langmuir and Freundlich), kinetic models (pseudo-first-order kinetics and pseudo-second-order kinetics), and thermodynamic parameters (ΔG°, ΔH°, and ΔS°) were also assessed to predict the biosorption process. The results of % RE revealed that detergent-treated sawdust (DTSD) and detergent-treated corn husk (DTCH) showed highest % RE of 9.27 ± 0.15 (%) and 99.16 ± 0.08 (%) for elimination of chromium (III), respectively. Similarly, base-treated sawdust (BTSD) and base-treated corn husk (BTCH) exhibited 95.53 ± 0.18 (%) and 92.43 ± 0.22 (%) of % RE compared with 77.87 ± 1.64 (%) and 81.96 ± 0.34 (%) removal efficiency of acid-treated sawdust (ATSD) and acid-treated corn husk (ATCH), respectively. The raw sawdust (RSD) and raw corn husk (RCH) showed lower % RE of 23.68 ± 1.52 (%) and 35.52 ± 4.74 (%) for Cr (III) removal. Further, the porosity on the biosorbent's surface and attached functional groups increased after chemical treatment and this variation resulted in increased removal efficiency after chemical treatments. The Langmuir isotherm model and the Freundlich isotherm model were employed to predict the biosorption process, and these both models are best-fitted. The pseudo-second-order kinetic model was promising representative of the biosorption data. The process was endothermic and the parameters indicated that Cr (III) biosorbtion was thermodynamically favorable. Therefore, the obtained results highlighted that detergent-treatment enhanced the % RE, and DTSD and DTCH are highly efficient biosorbents for eliminating Cr (III) from aqueous solutions. Thus, detergent-treated biosorbents are proved to be a promising sustainable, eco-friendly, and cost-effective way to treat HMs from aqueous solutions as they utilize natural agriculture waste products and also handle issues related to excessive solid waste management.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.