No abstract

Although the boiling process has been a major subject of research for several decades, its physics still remain unclear and require further investigation. This study aims at highlighting the effects of surface wettability on pool boiling heat transfer. Nanocoating techniques were used to vary the water contact angle from 20 • to 110 • by modifying nanoscale surface topography and chemistry. The experimental results obtained disagree with the predictions of the classical models. A new approach of nucleation mechanism is established to clarify the nexus between the surface wettability and the nucleate boiling heat transfer. In this approach, we introduce the concept of macro-and micro-contact angles to explain the observed phenomenon. To cite this article: H.T.

No abstract

In this paper,experimental and numerical studies of heat and mass transfer in a falling film absorber are presented. The investigated absorber is a plate heat exchanger used ina falling film configuration. The ammonia-water solution flows in a falling film mode along the plates. The vapour flows co-current with the falling film and the coolant fluid is in a countercurrent flow with the falling film. A prototype of ammonia-water absorption chiller isused to experimentally study the absorber behaviour in real operating conditions. Amacro study of the absorber and a local analysis deduced from local temperatures measurements along the falling film are presented. A numerical model and a simulation tool aredeveloped in order to complete the experimental investigations.The associatednumerical parametric studyaims to separatethe coolant mass flow rate impact.The model is validated with experimental dataand a maximal relative error of 15 % is observedbetween experimental and numerical results. The results of this study suggest that during the absorption process,mass transfers are controlled by the falling film mass transfer resistance and that the liquid-side heat transfer resistance is negligible.