No abstract

cles over a very broad energy range, as well as coordinated management, science operations, data processing, and scientific analysis. Together, ISIS observations allow us to explore the mechanisms of energetic particles dynamics, including their: (1) Originsdefining the seed populations and physical conditions necessary for energetic particle acceleration; (2) Acceleration-determining the roles of shocks, reconnection, waves, and turbulence in accelerating energetic particles; and (3) Transport-revealing how energetic particles propagate from the corona out into the heliosphere. The two ISIS Energetic Particle Instruments measure lower (EPI-Lo) and higher (EPI-Hi) energy particles. EPI-Lo measures ions and ion composition from ∼20 keV/nucleon-15 MeV total energy and electrons from ∼25-1000 keV. EPI-Hi measures ions from ∼1-200 MeV/nucleon and electrons from ∼0.5-6 MeV. EPI-Lo comprises 80 tiny apertures with fields-of-view (FOVs) that sample over nearly a complete hemisphere, while EPI-Hi combines three telescopes that together provide five large-FOV apertures. ISIS observes continuously inside of 0.25 AU with a high data collection rate and burst data (EPI-Lo) coordinated with the rest of the SPP payload; outside of 0.25 AU, ISIS runs in low-rate science mode whenever feasible to capture as complete a record as possible of the solar energetic particle environment and provide calibration and continuity for measurements closer in to the Sun. The ISIS Science Operations Center plans and executes commanding, receives and analyzes all ISIS data, and coordinates science observations and analyses with the rest of the SPP science investigations. Together, ISIS' unique observations on SPP will enable the discovery, untangling, and understanding of the important physical processes that govern energetic particles in the innermost regions of our heliosphere, for the first time. This paper summarizes the ISIS investigation at the time of the SPP mission Preliminary

with a planned heliocentric orbit that will carry it on a series of close passes by the Sun with perihelion distances that eventually will get below 10 solar radii. Among other in-situ and imaging sensors, the PSP payload includes the two-instrument "Integrated Science Investigation of the Sun" suite, which will make coordinated measurements of energetic ions and electrons. The high-energy instrument (EPI-Hi), operating in the MeV energy range, consists of three detector-telescopes using silicon solid-state sensors for measuring composition, energy spectra, angular distributions, and time structure in solar energetic particle events. The expected performance of this instrument has been studied using accelerator calibrations, radioactive-source tests, and simulations. We present the EPI-Hi measurement capabilities drawing on these calibration data and simulation results for illustrations.

Context. Silicon solid-state detectors are commonly used for measuring the specific ionization, dE∕dx, in instruments designed for identifying energetic nuclei using the dE∕dx versus total energy technique in space and in the laboratory. The energy threshold and species resolution of the technique strongly depend on the thickness and thickness uniformity of these detectors. Aims. Research has been carried out to develop processes for fabricating detectors that are thinner than 15 μm, that have a thickness uniformity better than 0.2 μm over cm2 areas, and that are rugged enough to survive the acoustic and vibration environments of a spacecraft launch. Methods. Silicon-on-insulator wafers that have a device layer of the desired detector thickness supported by a thick handle layer were used as starting material. Standard processing techniques were used to fabricate detectors on the device layer, and the underlying handle-layer material was etched away leaving a thin, uniform detector surrounded by a thick, supporting frame. Results. Detectors as thin as 12 μm were fabricated in two laboratories and successfully subjected to environmental and performance tests. Two detector designs were used in the High-energy Energetic Particles Instrument, which is part of the Integrated Science Investigation of the Sun instrument suite on NASA’s Parker Solar Probe spacecraft. These detectors have been performing well for more than two years in space. Conclusions. Thin silicon detectors in d E∕dx versus total energy instruments enable the identification of nuclei with energies down to ~1 MeV nuc−1. This research suggests that detectors at least a factor of two thinner should be achievable using this fabrication technique.