Effects of glycerol, xylitol, and sorbitol on selected physical properties of whey protein isolate (WPI) films were examined. Increasing glycerol or sorbitol content led to increases in moisture content, water vapor permeability, and % elongation; and decreases in tensile strength, elastic modulus, and glass transition temperatures of the films. Increasing levels of xylitol had no effect on permeability, moisture content, or glass transition temperature of the films, but decreased % elongation, tensile strength, and elastic modulus. Moisture content of the films correlated well with glass transition temperatures. Differences in measured physical properties of films with plasticizer type and concentration may be attributed to differences in the hygroscopic and crystalline properties of the plasticizers.

No abstract

The water-vapor permeability (WVP) and mechanical properties of edible films formed from dry blends or co-dried preparations of protein-polysaccharide powders prepared from whey protein concentrate ( WPC)-45 and alginate, pectin, carrageenan, or konjac flour ( WPC-45-to-polysaccharide ratio of 95:5 w/w) were investigated. Films were prepared from 8% WPC using WPC-45 (45% protein powder), consisting of 17.76 g of WPC-45 in 82.84 g of water per 100 g solution to give 8% protein w/w. Films formed from co-dried powders had lower WVP and higher tensile strength (TS), elastic modulus (EM) (P < 0.05), and elongation (EL) than equivalent films formed from the dry blended powders. Films containing alginate had lower WVP and higher TS, EM, and EL than films containing pectin, carrageenan, or konjac flour. There is potential to alter the physical properties of hydrophilic films by combining whey protein and polysaccharide components.

No abstract

No abstract