The motion of a spherical particle (with radius 1 to 6 mm) in a viscous fluid is measured using laser interferometry. The typical sensitivity on the measured displacement of the sphere is of the order of 50 nm. The particle is moving on the axis of a closed cylinder. The hydrodynamic interactions between the particle and the walls of the cylinder are compared with the theoretical result of Sano [J. Phys. Soc. Jpn. 56, 2713 (1987)] valid for a very small sphere. The agreement is excellent for the smallest sphere used in the experiment. The experiment also agrees with the result from the theory of lubrication when the sphere is close to a plane end wall. The effect of the particle roughness appears at small distances. Laser interferometry appears as a useful tool to study particle–wall hydrodynamic interactions when the geometry is cumbersome.

The Fraunhofer diffraction pattern of a narrow annular slit is recorded holographically to generate a beam that approximates a diffraction-free Bessel beam. The experimental limitations resulting from the annular-slit parameters such as the opening width and the transmission coefficient are discussed. The reconstructed Bessel beam is amplified by two-wave mixing in a photorefractive crystal. Thus the efficient conversion of a relatively large beam with a constant (or Gaussian) intensity distribution into a nondiffracting beam is achieved entirely by direct physical interference. We show that diffraction-free beams reproduced and amplified in this way can be applied to the measurement of the velocity of small objects by the use of the laser Doppler technique. In addition, the advantages of Bessel beams, especially in measuring the velocity of solids, are discussed.

A holographic recording with a filter is studied. In particular, influences of the hologram finite aperture on filtered images are considered. Irradiance distribution in defocused image is calculated. Furthermore in application an instrument measuring the diameter and 3 -D position of a glass fiber is described.

To obtain a diffraction-limited resolution with a lens assisted Fraunhofer hologram reconstructed by a reverse reference beam, residual aberrations have been corrected by using an auxiliary off-axis hologram.

No abstract