In spite of the huge research interest, ionic polymers could not have been synthesized in the vapor phase because the monomers of ionic polymers contain nonvolatile ionic salts, preventing the monomers from vaporization. Here, we suggest a new, one-step synthetic pathway to form a series of cross-linked ionic polymers (CIPs) in the vapor phase via initiated chemical vapor deposition (iCVD). 2-(Dimethylamino)ethyl methacrylate (DMAEMA) and 4-vinylbenzyl chloride (VBC) monomers are introduced into the iCVD reactor in the vapor phase to form a copolymer film. Simultaneously in the course of the deposition process, the tertiary amine in DMAEMA and benzylic chloride in VBC undergo a Menshutkin nucleophilic substitution reaction to form an ionic ammonium-chloride complex, forming a highly cross-linked ionic copolymer film of p(DMAEMA-co-VBC). To the best of our knowledge, this is the first report on the synthesis of CIP films in the vapor phase. The newly developed CIP thin film is further applied to the surface modification of the membrane for oil/water separation. With the hydrophilic and underwater oleophobic membrane whose surface is modified with the CIP film, excellent separation efficiency (>99%) and unprecedentedly high permeation flux (average 2.32 × 10 L m h) are achieved.

Advances in device technology have been accompanied by the development of new types of materials and device fabrication methods. Considering device design, initiated chemical vapor deposition (iCVD) inspires innovation as a platform technology that extends the application range of a material or device. iCVD serves as a versatile tool for surface modification using functional thin film. The building of polymeric thin films from vapor phase monomers is highly desirable for the surface modification of thermally sensitive substrates. The precise control of thin film thicknesses can be achieved using iCVD, creating a conformal coating on nano-, and microstructured substrates such as membranes and microfluidics. iCVD allows for the deposition of polymer thin films of high chemical functionality, and thus, substrate surfaces can be functionalized directly from the iCVD polymer film or can selectively gain functionality through chemical reactions between functional groups on the substrate and other reactive molecules. These beneficial aspects of iCVD can spur breakthroughs in device fabrication based on the deposition of robust and functional polymer thin films. This review describes significant implications of and recent progress made in iCVD-based technologies in three fields: electronic devices, surface engineering, and biomedical applications.

First springtail-inspired omniphobic surface by hierarchical structure to repel liquids even with high pressure of droplets.

Economical fabrication of waterproof/breathable substrates has many potential applications such as clothing or improved medical dressing. In this work, a facile and reproducible fabrication method was developed to render the Janus property to arbitrary porous substrates. First, a hydrophobic surface was obtained by depositing a fluoropolymer, poly(3,3,4,4,5,5,6,6,7,7,8,8,9,9,10,10,10-heptadecafluorodecyl methacrylate) (PHFDMA), on various porous substrates such as polyester fabric, nylon mesh, and filter paper. With a one-step vapor-phase deposition process, termed as initiated chemical vapor deposition (iCVD), a conformal coating of hydrophobic PHFDMA polymer film was achieved on both faces of the porous substrate. Since the hydrophobic perfluoroalkyl functionality is tethered on PHFDMA via hydrolyzable ester functionality, the hydrophobic functionality on PHFDMA was readily released by hydrolysis reaction. Here, by simply floating the PHFDMA-coated substrates on KOH(aq) solution, only the face of the PHFDMA-coated substrate in contact with the KOH(aq) solution became hydrophilic by the conversion of the fluoroalkyl ester group in the PHFDMA to hydrophilic carboxylic acid functionality. The hydrophilized face was able to easily absorb water, showing a contact angle of less than 37°. However, the top side of the PHFDMA-coated substrate was unaffected by the exposure to KOH(aq) solution and remained hydrophobic. Moreover, the carboxylated surface was further functionalized with aminated polystyrene beads. The porous Janus substrates fabricated using this method can be applied to various kinds of clothing such as pants and shirts, something that the lamination process for Gore-tex has not allowed.

Exquisite surface wettability control of separation system surface is required to achieve separation of liquids with low surface tension difference. Here, we demonstrate a series of surface-energy-controlled homogeneous copolymer films to control the surface wettability of polyester fabric, utilizing a vapor-phase process, termed as initiated chemical vapor deposition (iCVD). The homogeneous copolymer films consist of a hydrophobic polymer, poly (2,4,6,8-tetramethyl-2,4,6,8-tetravinylcyclotetrasiloxane), pV4D4, and a hydrophilic polymer, poly(4-vinylpyridine), p4VP. Because the mixing of two or more components is always favorable in vapor phase, the iCVD process allows the formation of homogeneous copolymers from two immiscible, hydrophilic/hydrophobic monomer pairs, which is highly challenging to achieve in liquid phase. Simply by tuning the flow rate ratio of monomer pairs, a series of homogeneous copolymers with systematically controlled surface energy were formed successfully. The fabricated separation system could separate water (surface energy = 72.8 mJ/m 2 ), glycerol (64 mJ/m 2 ), ethylene glycol (48 mJ/m 2 ), and olive oil (35.1 mJ/m 2 ) sequentially with excellent selectivity, just by choosing a copolymer-coated polyester fabric with proper surface energy. Considering the small differences in the surface tension of the liquids used in this work, the surface-energy-controlled separation system can be a powerful tool to separate various kinds of liquid mixtures.