Modern industrial technologies require raw materials of high purity from suppliers, especially due to the possible presence of inclusions of heterogeneous metals in them. The existence of metallic inclusions of heterogeneous metals in the raw materials leads to equipment failure, a decrease in the quality of output products, and, consequently, large financial losses. Since the main method of transporting raw materials in the industry is still a conveyor belt, this imposes additional conditions to control and remove metallic inclusions. For various reasons, current methods for removing metallic inclusions in the conveyor belt do not fully meet the needs of modern production. The main issue related to existing removal systems is the lack of intelligent interaction between these systems and the absence of information exchange between systems that detect and remove metallic inclusions. An alternative method for removing metallic inclusions of heterogeneous metals from loose medium has been proposed, which implies the tandem operation of the system that detects metallic inclusions and the system that removes them. The tandem operation of the two systems makes it possible to exchange information about a detected metallic inclusion and, as a result, to more flexibly use tools for the removal of metallic inclusion depending on the size and location of the metallic inclusion relative to the conveyor belt axis. At the same time, the control unit of the removal system makes it possible to control the conveyor belt itself, which allows the removal of complex metallic inclusions using the reverse of the electric drive of the belt, as well as enables a control check of the fact of removal. The developed algorithm of the removal system was implemented in the programming environment TIA-Portal. The introduction of this removal system could reduce the number of metallic inclusions in raw materials by 15‒20 %; moreover, its application is not limited to only one sector of the national economy
The article deals with the actual problem of theoretical substantiation of the method of identification (diagnosis) of metal inclusions (hereinafter referred to as metal inclusions) in bulk raw materials under the conditions of a conveyor belt. The presence of metal inclusions in the raw material transported by the conveyor belt can lead to both emergencies and deterioration in the quality of the output product. The identification method provides for diagnosing the presence of metal inclusions, determining its dimensions, type of metal and coordinates relative to the cross-section of the conveyor belt. The results of theoretical and experimental studies of the method for identifying metal inclusions based on a scanning signal and an additional excitation coil are considered. A mathematical model has been developed for determining the position of metal inclusions on a conveyor belt relative to a line perpendicular to the axis between two excitation coils, including two trajectories for determining coordinates for three excitation coils and two receiving coils.
The work shows that inadequate and untimely hydrological forecasting of the level of flood development leads to significant annual economic damage and loss of life. The latter requires constant control and monitoring of the state of water bodies, which is possible with modern automated control and monitoring systems. The analysis showed that the information and measurement systems (AIMS) for flood control, which are operated in Ukraine, their quantity, cost and technical characteristics do not provide the information necessary for predicting the development of floods. Analysis of trends in the development of systems for automated control and monitoring of the state of water bodies showed that modern foreign systems that are at the stage of development or testing are based on the use of microcontrollers, "smart" converters of physical quantities, modern communication systems and Internet of Things technology, as well as the use of smartphones with a Raspberry Pi camera for determining the water level in rivers. The development with the use of the industrial Internet of Things of the basic version of the geoinformation system for control and monitoring of the state of water bodies GIS-Dniester is given. The structure, components and functions of GIS-Dniester are considered. The tasks of organizing hardware and software for parameterizing and diagnosing "smart" converters, establishing a communication environment for industrial communication, developing algorithms for collecting, processing and transmitting data, studying the characteristics of measuring signals are being solved. The results of the study of the echo profiles of the XPS10 ultrasonic level sensor with “smart” -converters Multiranger 100, as well as the procedure for working with the GIS-Dniester are presented. The use of the developed GIS-Dniester has shown its effectiveness and reliability in operation.
У праці розглянуто основні типи покриттів та їх розповсюдженість у світі за частотою застосування в машинобудуванні. Відзначено, що найбільш розповсюдженими серед них є металеві – електрохімічні хромові покриття та неме-талеві – оксидні покриття, сформовані у різних електролітах. Проведено аналіз способів та обладнання для утилізації відпрацьованих електролітів для формування покриттів на деталях машин у гальванічних цехах і дільницях. Як об’єкти дослідження вибрали електроліти для електрохімічного хромування сталей та для плазмовоелектролітичного оксидування алюмінієвих сплавів. Використано системний підхід до вирішення актуальної проблеми утилізації відпрацьованих електролітів гальванічних ванн для нанесення покриттів, що є особливо важливим завданням на етапі переходу до «зелених технологій». Розроблено технологічну схему переробки відпрацьованих електролітів, яка включає процеси осадження, нейтралізації та очищення. Застосовано мехатронний підхід і комп’ютерне моделювання під час проектування установки для реалізації вказаної технології, котра містить два реактори і гідроциклон-фільтр, які сполучені трубопроводами, а також оснащену насосами, вказівниками рівня рідини, рН-метричним обладнанням та автоматизованою системою керу-вання. В склад установки входить розроблена нова конструкція гідроциклон-фільтра, який забезпечує комбіноване очищення рідин від завислих частинок забруднення шляхом одночасного поєднання відцентрового очищення та фільтрування, а також дозволяє здійснювати промивання його кільцевого зазору та регенерацію фільтрувальної зернистої засипки фі-льтрувальної касети. Розроблена технологія утилізації відпрацьованих електролітів є ефективною під час експлуатації та не потребує дороговартісного обладнання, процес є екологічно безпечним як для обслуговуючого персоналу, так і для навколишнього природного середовища, а продукти переробки можна повторно використовувати у виробничому циклі.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.