Розглядаються питання надійного опису транспортування багатофазних вуглеводневих систем. Встановлено, що основними причинами, що ускладнюють експлуатацію трубопроводів і знижують їх продуктивність та ефективність, є висока відносна швидкість газової фази, утворення гідрофобних водонафтових емульсій, формування відкладень на стінках трубопроводів. Вивчаються методи аналітичних уявлень багатофазних течій у трубах при видобутку та транспортуванні вуглеводнів. Встановлено, що в нафтогазовій промисловості при вивченні багатофазних течій у трубі найбільшого поширення набули два підходи: багаторідинна модель і модель дрейфу. З точки зору фундаментальних досліджень, цікавить питання про зв'язок між багаторідинною моделлю і спрощеною моделлю дрейфу, і про межі застосування останньої. Вивчено модель дрейфу для нестаціонарних газорідинних течій у довгих трубопроводах, наведено результати розв'язання задач про гідравлічний транспорт твердої фази в трубах, а також представлений висновок асимптотичних рівнянь моделі дрейфу для течії розрідженої газорідинної дисперсної суміші в круглій трубі. Представлені припущення, прийняті при виведенні асимптотичних рівнянь багатофазної течії в трубі та обґрунтування застосування моделі дрейфу. Наведено рішення для профілю та швидкості дрейфу та проведено їх аналіз. На основі представлених у фахових виданнях даних вказується, що найбільш сильний вплив на результати вносить зміна амплітуди швидкості дрейфу у висхідних ділянках течії. Вивчення методів аналітичних досліджень має практичну значущість, зумовлену широким спектром додатків одновимірних моделей багатофазних течій у свердловинах та довгих трубопроводах. Визначено, що в даний час перевагу в дослідженнях має модель дрейфу, яка широко впроваджена в комерційні симулятори багатофазних течій для нафтогазових додатків та в узагальненому вигляді може бути використана для розвитку та покращення цих програмних продуктів
The object of research is the fuel gas system of a gas turbine engine. The study of the use of secondary energy resources of the gas-pumping unit at the compressor station of the main pipeline has been carried out. The work of a gas turbine engine, including the work of the fuel gas system, is considered. The main drawback of the fuel gas system is revealed – ineffective use of excess gas pressure. An informational analysis of the options that eliminate the identified drawback is carried out. It is shown that in order to eliminate the disadvantage, it is advisable to use a turbo-expander at the compressor station to utilize the excess pressure of the fuel gas. It is also shown that the operation of a fuel gas turboexpander to drive an additional air compressor as part of a gas turbine engine is impractical. An expander-generator set with the generation of additional electricity at the compressor station is recommended for use. Modeling the operation of the utilization system made it possible to recommend constructive proposals for its improvement. A schematic diagram of a system for the complex utilization of excess pressure of fuel gas and heat of combustion products from the operation of a gas turbine engine is proposed. The system of complex utilization includes parts-generator unit, heat exchanger for cooling process gas and heat exchanger for firing gas. Regenerative heating of fuel gas up to 250 °С reduces energy consumption for heating it up to the ignition temperature. A model of a robot installation of the type GPU 16/56-1.44 (Ukraine) is carried out. It is determined that when a component engine of the J-59 (Ukraine) type with a shaft power of 16 MW operates, it is possible to additionally receive 102 kW of electricity and save 64 m3/h of fuel gas. It is revealed that the subcooling of the process gas does not play a significant role in reducing energy consumption during its transportation. It is recommended to use the process gas to heat the cold fuel gas stream downstream of the turboexpander to positive temperatures. The integrated utilization system is not a simple connection of an expander-generator set and two heat exchangers along the flow of the fuel gas. As a result of its operation, a significant reduction in the consumption of fuel gas and electricity is achieved. The disadvantages that hinder the implementation of a comprehensive disposal system are identified. This is the use of equipment for generating electricity at a compressor station. It is uncharacteristic for the operation of the station and requires additional qualifications in service. It is also required that the characteristics of industrial expander-generator sets correspond to the fuel gas consumption of a gas turbine engine.
The object of research is a data model that characterizes the pumping units of main oil pipelines. The paper considers the creation of pumps database and their characteristics as a component of software systems designed to search for sources of energy saving in pipeline transportation of oil and oil products. An overview of existing programs for calculating the joint operation of an oil pumping station and a pipeline is given. It is shown that most programs are inaccessible for analyzing the applied data storage technologies, or involve manual input of entry data without using databases. Comparative analysis of spreadsheets and relational databases is performed. It is shown that relational databases better meet the requirements of data convenience, availability, scalability, and performance. A physical model of a relational database is presented. The parent and child entities have been established, which make it possible to fully reflect all information about the pumping unit, namely:-coefficients of hydraulic characteristics depending on the diameter of the impeller rotor;-characteristics depending only on the pump make;-classification of the pump by design or purpose. Relationship types and referential integrity rules are defined between entities when deleting or updating data. For data management, the SQLite system is proposed, which provides data manipulation in the SQL query language and does not require the development of additional software. The analysis of possible ways of organizing multilingualism using a database is carried out. The text of the SQL query is proposed, which allows to select the pump with its characteristics by the pump make and impeller diameter. A database structure is proposed that allows storing information about equipment for oil pipelines for various purposes, which makes it possible for automated calculations of complex technological processes. The pumping unit database is an open source project that is posted on the public web service GitHub.
ЭФФЕКТИВНОСТЬ РАБОТЫ ПРОМЫШЛЕННЫХ КОНТАКТНЫХ АППАРАТОВВ статье представлены результаты экспериментального исследования эффективности охлаждения воды в вентиляторных градирнях разных конструкций при относительных расходах воды и воздуха в широком диапазоне. Проведено сравнение полученных результатов с аналогичными характеристиками абсорберов.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.