This article gives an overview of the application of nanomaterials in environmental remediation. In the area of environmental remediation, nanomaterials offer the potential for the efficient removal of pollutants and biological contaminants. Nanomaterials in various shapes/morphologies, such as nanoparticles, tubes, wires, fibres etc., function as adsorbents and catalysts and their composites with polymers are used for the detection and removal of gases (SO 2 , CO, NO x , etc.), contaminated chemicals (arsenic, iron, manganese, nitrate, heavy metals, etc.), organic pollutants (aliphatic and aromatic hydrocarbons) and biological substances, such as viruses, bacteria, parasites and antibiotics. Nanomaterials show a better performance in environmental remediation than other conventional techniques because of their high surface area (surface-to-volume ratio) and their associated high reactivity. Recent advances in the fabrication of novel nanoscale materials and processes for the treatment of drinking water and industrial waste water contaminated by toxic metal ions, radionuclides, organic and inorganic solutes, bacteria and viruses and the treatment of air are highlighted. In addition, recent advances in the application of polymer nanocomposite materials for the treatment of contaminants and the monitoring of pollutants are also discussed. Furthermore, the research trends and future prospects are briefly discussed.

No abstract

The development of novel reagents and antibiotics for combating multidrug resistance bacteria has received significant attention in recent years. In this study, new antimicrobial star polymers (14-26 nm in diameter) that consist of mixtures of polylysine and glycopolymer arms were developed and were shown to possess antimicrobial efficacy toward Gram positive bacteria including methicillin-resistant Staphylococcus aureus (MRSA) and vancomycin-resistant Enterococcus (VRE) (with MIC values as low as 16 μg mL(-1)) while being non-hemolytic (HC50 > 10,000 μg mL(-1)) and exhibit excellent mammalian cell biocompatibility. Structure function analysis indicated that the antimicrobial activity and mammalian cell biocompatibility of the star nanoparticles could be optimized by modifying the molar ratio of polylysine to glycopolymers arms. The technology described herein thus represents an innovative approach that could be used to fight deadly infectious diseases.

No abstract

Water disinfection materials should ideally be broad-spectrum-active, nonleachable, and noncontaminating to the liquid needing sterilization. Herein, we demonstrate a high-performance capacitive deionization disinfection (CDID) electrode made by coating an activated carbon (AC) electrode with cationic nanohybrids of graphene oxide-graft-quaternized chitosan (GO-QC). Our GO-QC/AC CDID electrode can achieve at least 99.9999% killing (i.e., 6 log reduction) of Escherichia coli in water flowing continuously through the CDID cell. Without the GO-QC coating, the AC electrode alone cannot kill the bacteria and adsorbs a much smaller fraction (<82.8 ± 1.8%) of E. coli from the same biocontaminated water. Our CDID process consists of alternating cycles of water disinfection followed by electrode regeneration, each a few minutes duration, so that this water disinfection process can be continuous and it only needs a small electrode voltage (2 V). With a typical brackish water biocontamination (with 10(4) CFU mL(-1) bacteria), the GO-QC/AC electrodes can kill 99.99% of the E. coli in water for 5 h. The disinfecting GO-QC is securely attached on the AC electrode surface, so that it is noncontaminating to water, unlike many other chemicals used today. The GO-QC nanohybrids have excellent intrinsic antimicrobial properties in suspension form. Further, the GO component contributes toward the needed surface conductivity of the CDID electrode. This CDID process offers an economical method toward ultrafast, contaminant-free, and continuous killing of bacteria in biocontaminated water. The proposed strategy introduces a green in situ disinfectant approach for water purification.

Cationic polymethacrylates are interesting candidates for bacterial disinfectants since they can be made in large-scale by various well-established polymerization techniques such as atom transfer radical polymerization (ATRP). However, they are usually toxic or ineffective in serum and various strategies to improve their biocompatibility or nonfouling property have often resulted in compromised bactericidal activity. Also, star-shaped polymers are less explored than linear polymers for application as antibacterial compounds. In this paper, star polymers with poly[2-(dimethylamino)ethyl methacrylate] (PDMA) as the arms and polyhedral oligomeric silsesquioxane (POSS) as the core (POSS-g-PDMA) were successfully synthesized by ATRP. The minimum inhibition concentrations (MICs) of the synthesized POSS-g-PDMA are in the range of 10-20 μg/mL. POSS-g-PDMA was further modified by various hydrophilization strategies in attempting to reduce hemolysis. With quaternization of POSS-g-PDMA, the antibacterial activities of the obtained quaternary polymers are almost unchanged and the copolymers become relatively nonhemolytic. We also copolymerized sulfobetaine (SB) with POSS-g-PDMA to obtain random and block PDMA-co-PSB arm structures, where the PDMA and poly(sulfobetaine) were the cationic and zwitterionic blocks, respectively. The random cationic-zwitterionic POSS-g-(PDMA-r-PSB) copolymers showed poor antibacterial activity, while the block POSS-g-(PDMA-b-PSB) copolymers retained the antibacterial and hemolytic activity of the pristine POSS-g-PDMA. Further, the block copolymers of POSS-g-(PDMA-b-PSB) showed enhanced antifouling property and serum stability as seen by their nanoparticle size stability in the presence of serum and reduced red blood cell aggregation; the POSS-g-(PDMA-b-PSB) also somewhat retained its MIC in blood unlike the quaternized or random zwitterionic copolymers. The antibacterial kinetics study showed that Escherichia coli can be killed within 30 min by both random and block copolymers of POSS-g-(PDMA-co-PSB). Finally, our POSS star polymers showed low toxicity to zebrafish embryo and could be potentially used in aquaculture antibacterial applications.

No abstract

No abstract