Termites are insects that can damage buildings, paper and plants. Termites are controlled by using termiticides (chemicals). Besides polluting the environment, termiticides may have harmful effects to organisms, including humans, and destroy metal. The use of chemicals will be environmentally and economically profitless. A joint effort to utilize biodegradable material will help to reduce the negative impacts of termiticides. One of the materials that can use to control termites is chitosan. The purpose of this study was to determine the termiticidal activity of chitosan on paper against termites. The termiticidal activity test followed method JIS K 1571 2004. The resistance of paper to termite damage was determined by calculating the percentage of weight loss and termite mortality rate. The following concentrations of chitosan in acetic acid were used: 0.5%, 1%, 1.5% and 2%. The test result showed that weight loss percentages were 20.49%, 16.37%, 15.77% and 10.80%, respectively. On the other hand, the weight loss percentage of paper without chitosan was 32.69%, which shows that termites do not favour chitosan used in the paper. The activity of termites was successfully inhibited when the concentration of chitosan was increased, and the percentage of paper weight loss decreased from 10.80% to 20.49%. Paper without chitosan had a termite mortality rate of 18.3%; The addition of chitosan increased termite mortality to 28.2%–30.4%. The percentage of weight loss decreased with increasing termite mortality. The termite mortality rate show that chitosan is nontoxic and potential as biotermiticide for paper.
Kemasan menjadi faktor penting dalam meningkatkan nilai jual produk, selain itu kemasan berfungsi untuk melindungi produk, media promosi, menjadi identitas suatu produk, memperpanjang umur simpan produk, memudahkan dalam pendistribusian dan pemasaran produk, serta memenuhi kebutuhan dan kepuasan konsumen. Kota Serang merupakan salah satu target tempat wisata yang banyak dikunjungi wisatawan saat liburan. Hal ini menunjang perkembangan kuliner dan produk olahan hasil UKM di kota Serang untuk dijadikan produk oleh-oleh. Secara geografis, kota serang berada tidak jauh dari pesisir pantai utara sehingga banyak sumber daya hasil perikanan dan kelautan. Salah satu produk olahan hasil perikanan yang belum dikemas secara menarik adalah bakso goreng (makanan ringan yang berbahan dasar dari ikan). Bakso goreng sudah cukup dikenal oleh warga Serang, sebagai cemilan khas kota Serang. Namun aplikasi kemasan yang masih sangat minimalis menyebabkan produk ini tidak begitu dikenal oleh masyarakat luar daerah. Berdasarkan permasalahan kemasan tersebut, maka diperlukan suatu pengembangan alat kemasan efesien yang dapat diaplikasikan sehingga membantu UKM di daerah Serang untuk membuat kemasan secara mandiri. Program kerjanya mencakup perancangan dan pembuatan mesin produksi cetak alat cutting hand press dan, pelatihan serta pendampingan dalam penggunaan alat tersebut. Dengan adasnya alat cutting hand press sebagai mesin produksi cetak kemasan sekunder ini bisa membantu UKM Bakso Ikan Laksana meningkatkan kualitas dan nilai jual dari bakso goreng tersebut. Metode untuk melakukan program IPTEK bagi masyarakat ini adalah : tahap persiapan dengan melakukan survei ke daerah Serang dan membuat kerjasama dengan UKM setempat, tahap selanjutnya adalah merancang dan membuat alat cutting handpress sebagai mesin penunjang produksi kemasan yang sesuai dengan kebutuhan UKM dan ketersediaan bahan habis pakai yang bisa dibeli di kota Serang tersebut, setelah itu melakukan pendampingan pengoperasian alat cutting kemasan tersebut hingga UKM bisa melakukannya secara mandiri. Setelah dilakukan pelatihan dan pendampingan dalam pembuatan kemasan, UKM bakso Laksana, telah memiliki dan mampu membuat kemasan secara mandiri.
Some factors of UV-curing process, they are wavelength and intensity of UV-curing. The higher intensity of UV the quicker it will dry, but if it excesses, it lead to degradation of free radical polymerization. The formation of free radical leads to cancer. Meanwhile, the degradation of packaging color will have a negative impact where people assumed that the packaging was imitation so that the product considered imitation. The color changes in the package due to the influence of temperature during UV curing. Therefore, the aim of this research is determine the characteristic of UV-flexo inks and print quality of paper cup. The method in this research is a test of the UV-flexo inks PHA types, i.e. Black 1; Black II; and Green. This study shows that paper cup of SPE of PHA types has a good heat resistance at 110oC - 135oC. The value of density changes between 0.012-0.014. UV-curing minimum for Black I type at 36 mJ/cm2; Black II is 40 mJ/cm2; and Green at 28 mJ/cm2. The findings suggest that the environmental temperature is proportional to the concentration of UV-flexo inks PHA types. And UV-flexo inks do not undergo physical changes such as liming, melting, and evaporation. Keywords: Packaging, Flexografi, UV-curing, UV-flexo Ink. ABSTRAK Faktor yang mempengaruhi proses pengeringan tinta UV, salah satunya adalah besarnya panjang gelombang dan intensitas sinar UV.¬¬ Semakin tinggi intensitas sinar UV maka tinta UV akan semakin cepat mengering, tapi jika berlebihan mengakibatkan degradasi polimerisasi radikal bebas. Terbentuknya radikal bebas dapat memicu kanker dan terjadinya degradasi perubahan warna kemasan akan berdampak negatif dimana masyarakat beranggapan bahwa kemasan itu palsu sehingga berakibat produk tersebut juga dianggap palsu, padahal perubahan warna pada kemasan tersebut disebabkan karena pengaruh temperatur pada saat UV-curing. Tujuan penelitian ini adalah mengetahui karakteristik sifat tinta UV flekso dan kualitas cetak pada material papercup. Metode yang digunakan adalah pengujian terhadap tinta UV flekso tipe PHA, yaitu Black I; Black 2; dan Green. Hasil penelitian ini memperlihatkan bahwa perubahan nilai density antara 0.012-0.014. Kuat pancar minimal lampu UV tipe Black I sebesar 36 mJ/cm2; Black II sebesar 40 mJ/cm2; dan Green sebesar 28 mJ/cm2. Dan hasil cetakan paper cup berbahan dasar SPE menggunakan tinta UV Flexo tipe PHA memiliki ketahanan panas yang baik pada temperatur 110oC – 135oC. Hal ini membuktikan bahwa temperatur lingkungan berbanding lurus terhadap kepekatan warna tinta UV-flekso tipe PHA. Dan tinta UV-flekso tidak mengalami perubahan secara fisik seperti pengapuran, meleleh, dan penguapan. Kata kunci: Kemasan, Fleksografi, UV-curing, Tinta UV-flekso
Susu kedelai adalah produk yang rentan mengalami kontaminasi dan kesalahan penyimpanan (handling), sehingga diperlukan kemasan cerdas Time Temperature Indicator (TTI) untuk mendeteksi kualitas susu kedelai. Pembuatan TTI dengan menggunakan membran indikator (kertas saring whatman) divariasikan derbandingan jumlah ekstak kunyit dan NaOH 1:3, 1:5, dan 1:7. Pembuatan TTI menggunakan komposisi, dan pengeringan membran asetat dalam waktu 40, 50, dan 60 menit. Kualitas susu kedelai menjadi tidak segar pada suhu ruang jam ke–6 (nilai pH 6.34) dan pada jam ke 48 (nilai pH 6.32) pada suhu kulkas. Skor organoleptik menunjukan ciri-ciri basi pada jam ke–6 (suhu ruang) dan jam ke–48 (suhu kulkas). Uji mikroba menunjukan tidak lagi layak konsumsi pada jam ke – 6 penyimpanan suhu ruang (6.89 log CFU/ml) dan jam ke 48 penyimpanan kulkas (5.68 log CFU/ml). Hasil menunjukan bahwa aplikasi TTI menggunakan ekstrak kunyit dapat memonitoring kualitas susu kedelai pada suhu ruang namun tidak pada suhu kulkas. Dengan variasi yang tepat untuk suhu ruang adalah 1:7, dengan pengeringan membran asetat 60 menit.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.