Surface plasmon resonance (SPR) based fiber optic sensor with two types of plasmonic metals (gold and silver) are theoretically studied and implemented experimentally. Performance characteristics like sensitivity, signal to noise ratio, the figure of merit, and resolution are evaluated for both simulated and fabricated sensor. The results of theoretical and experimental studies and also between the sensor with the gold layer and that with silver have been compared. Sensitivity is larger for the sensor with the gold layer while the signal to noise ratio and figure of merit are larger for the sensor with the silver layer for both the experimental and theoretical studies. The resolution is slightly larger for the sensor with the gold layer and there is some difference between the resolution of the simulated and that of the fabricated sensor.
The localized plasmon resonance enhancement mechanisms were investigated as a function to increase the shell thickness of the prepared hexagonal nanodiscs arrays of Au@TiO2 core‐shell. The bare Au hexagonal nanodiscs array exhibited multiple plasmon resonance modes in the ultraviolet (UV) to near‐infrared (NIR) region. Au@TiO2 nanodiscs configuration present three different enhancement mechanisms with increasing TiO2 shell thickness. First, a strengthened plasmon‐induced resonance energy transfer (PIRET) for higher plasmonic resonance mode in the UV region. Second, redshifted and broadened direct electron transfer (DET) processes for the plasmonic dipole resonance mode from the Vis to the NIR region. Third, an increased hybridization retardation effect for the higher plasmonic mode in the Vis region. By using a facile and cost‐effective technique (nonlithographic route) to fabricate highly ordered core‐shell nanodiscs arrays (Au@TiO2 hexagonal nanodiscs) on a large area of Si substrate (>cm2) via an ultrathin alumina membrane (UTAM), this technique provides a perfect shadow mask to fabricate Au nanodiscs arrays; furthermore, the shadow effect of UTAM pores offers enough space to cover Au nanodiscs by the TiO2. These plasmonic core‐shell nanodiscs reveal a highly promising pathway to discovering new enhancement phenomena that can be applied in diverse applications such as plasmon‐enhanced energy conversion, biosensing, and surface‐enhanced vibrational spectroscopy.
In this work, a chemical optical fiber sensor based on Surface Plasmon Resonance (SPR) was designed and implemented using plastic optical fiber. The sensor is used for estimating refractive indices and concentrations of various chemical materials (methanol, distilled water, ethanol, kerosene) as well as for evaluating the performance parameters such as sensitivity, signal to noise ratio, resolution and the figure of merit of the fabricated sensor. It was found that the value of the sensitivity of the optical fiber-based SPR sensor, with 40 nm thick and 10 mm long Au metal film of exposed sensing region, was 3μm/RIU, while the SNR was 0.24, the figure of merit was 20, and the resolution was 0.00066. The sort of optical fiber utilized in this work is plastic optical fiber with a core diameter of 980 μm, a fluorinated polymer cladding of 20μm and a numerical aperture of 0.51.
Optical fiber biomedical sensor based on surface plasmon resonance for measuring and sensing the concentration and the refractive index of sugar in blood serum is designed and implemented during this work. Performance properties such as signal to noise ratio (SNR), sensitivity, resolution and the figure of merit were evaluated for the fabricated sensor. It was found that the sensitivity of the optical fiber-based SPR sensor with 40 nm thick and 10 mm long Au metal film of the exposed sensing region is 7.5µm/RIU, SNR is 0.697, figure of merit is 87.2 and resolution is 0.00026. The sort of optical fiber utilized in this work is plastic optical fiber with a core diameter of 980 µm, a cladding of 20μm, and a numerical aperture of 0.51.
Surface plasmon resonance (SPR) based fiber optic sensor with three types of bilayer configurations (silver/gold, copper/gold, and aluminum/gold) is theoretically analyzed. Performance parameters like sensitivity, signal to noise ratio, figure of merit, and resolution are evaluated for each configuration. Signal to noise ratio (SNR), and figure of merit (FOM) are enhanced very well for the selected bilayer configurations as the outer gold layer thickness increased, the sensitivity enhanced also but with small frictions while the resolution has decreased slightly.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.