This study investigated the effect of heat-treated wood content on the water absorption, mechanical, and thermal properties of wood plastic composites (WPCs). The WPCs were produced from various loadings (30, 40, and 50 wt%) of heat-treated and untreated alder wood flours (Alnus glutinosa L.) using high-density polyethylene (HDPE) with 3 wt% maleated polyethylene (MAPE) coupling agent. All WPC formulations were compression molded into a hot press for 3 min at 170 ºC. The WPCs were evaluated using mechanical testing, Fourier transform infrared spectroscopy (FTIR), thermogravimetric analysis (TGA), and differential scanning calorimetry (DSC). The mechanical property values of the WPC specimens decreased with increasing amounts of the heattreated wood flour, except for the tensile modulus values. The heat treatment of alder wood slightly increased the thermal stability of the WPCs compared with the reference WPCs. The crystallization degree (Xc) and the enthalpy of crystallization of the WPCs slightly decreased with increasing content of the heat-treated wood flour. However, all WPCs containing the heat-treated alder wood flour showed a higher crystallinity degree than that of the virgin HDPE.
Effect of industrial grade multi-walled carbon nanotubes on mechanical, decay, and thermal properties of wood polymer nanocomposites was investigated. To meet this objective, pine wood flour, polypropylene with and without coupling agent (maleic anhydride grafted polypropylene), and multi-walled carbon nanotube (0, 1, 3, 5 wt%) were compounded in a twin screw co-rotating extruder. The mass ratio of the wood flour to polypropylene was 50/50 (w/w) in all compounds. Test specimens were produced using injection molding machine from the pellets. The flexural and tensile properties, biological durability, and thermal analysis (thermogravimetric analysis and differential scanning calorimetry) of the nanocomposites were investigated. The flexural and tensile properties of the wood polymer nanocomposites increased with increasing content of the industrial grade multi-walled carbon nanotubes (from 1 to 5 wt%) and maleic anhydride grafted polypropylene (3 wt%). The mass loss rates of the wood polymer nanocomposites decreased with increasing amounts of the maleic anhydride grafted polypropylene and industrial grade multi-walled carbon nanotube. The differential scanning calorimetry analysis showed that the melt crystallization enthalpies of the wood polymer nanocomposites increased with increasing amount of the industrial grade multi-walled carbon nanotubes. The increase in the Tc indicated that the industrial grade multi-walled carbon nanotubes were the efficient nucleating agent for the wood polymer nanocomposites.
The aim of this study was to investigate the dimensional stability, mechanical and biological performance and thermal degradation of wood–plastic composites made from high-density polyethylene and recycled wood treated with chromated copper arsenate (CCA), a commonly used wood preservative chemical. Virgin pine wood samples were also prepared with and without a coupling agent and used as the control group. Samples of CCA-treated Scots pine ( Pinus sylvestris L.) with varying wood content were produced by adding different ratios of the coupling agent. The recycled CCA-treated wood-filled composites exhibited better flexural and tensile strength properties and dimensional stability than the control group, whilst their impact strength was less. Biological test values showed improved durability against termites and fungus with the recycled CCA-treated wood-filled composites. In addition, the leaching of heavy metals was significantly diminished when the coupling agent was utilized at a level of 5% (w/w), thus presenting a much lower impact on the environment.
Sisal-carbon hybrid composites were produced from mixtures having different weight ratios of sisal, carbon fibers and recycled polypropylene. All formulations were tested and evaluated for tensile and flexural properties. In addition, the thermal stability of the sisal-carbon hybrid composites were examined via thermogravimetric analysis and decay tests were conducted to determine the degradation of the hybrid composites. Results showed that the biological durability and mechanical and thermal properties improved with the increasing weight ratios of carbon fiber in the hybrid composites. According to the mechanical tests, the optimum hybrid composite formulation was found to be 12% sisal fiber + 28% carbon fiber + 60% rPP.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.