Bu çalışmada, lityum sıvısı dıştan manyetik alan indüksiyonuna maruz bırakılan üç boyutlu dairesel bir kanalda sayısal olarak incelenmiştir. Manyetik alan, kanala akış yönüne dik olarak uygulanmıştır. Re=2250 ve manyetik alan kuvveti sırasıyla 0T, 0.04T, 0.08T ve 0.12T olarak seçilmiştir. Bunun yanında, akışkan sıcaklığı 473.15 K iken cidar sıcaklığı 373.15 K'dir. Hesaplamalar ANSYS-Fluent ticari yazılımı ile gerçekleştirilmiştir. Manyetik alanın akışkan hızı, basınç ve sıcaklık üzerindeki etkileri grafiksel olarak sunulmuştur. Manyetik alan etkisinin akışkan hızını azaltırken, basıncı arttırdığı gözlemlenmiştir. Ayrıca, manyetik alan boru uzunluğu boyunca kanalın farklı bölgelerinde, sıcaklığı farklı şekilde etkilediği gözlemlenmiştir. In this study, the lithium fluid was numerically analyzed in a threedimensional circular channel exposed to external magnetic field induction. The magnetic field is applied perpendicular to the flow direction of the channel. Re=2250 and the magnetic field strength was selected as 0T, 0.04T, 0.08T and 0.12T, respectively. Besides, while the fluid temperature is 473.15 K, the wall temperature is 373.15 K. Calculations were performed with ANSYS-Fluent commercial software. The effect of the magnetic field on the fluid velocity, pressure and temperature has presented graphically. While the magnetic field seriously has reduced the fluid velocity, the pressure has observed to increase. Also, it has been observed that the magnetic field affects the temperature differently in different regions of the channel along the pipe length.
Öz: Bu çalışmada, manyetik alan altındaki bir boruda Al2O3-su nanoakışkanının akış karakteristikleri laminer şartlar altında sayısal olarak incelenmiştir. Çalışma ANSYS-FLUENT ticari yazılım programı ile gerçekleştirilmiştir. Manyetik alan akış yönüne dik verilmiştir. Akışkan sıcaklığı (Ti) boru sıcaklığından (Tw) daha yüksek tutularak akışkanın soğuması sağlanmıştır (Ti > Tw). Reynolds sayısı (Re) = 10, 100, 500, 1000, 2000, Hartmann sayısı (Ha) = 0, 25, 50, 100 ve nanopartikül hacimsel oranı (φ) = 0, 0.01, 0.03, 0.05 olarak seçilmiştir. Akışkan hız değişimleri ve basınç değişimleri detaylı olarak incelenmiştir. Akışkan hızı, manyetik alan ve nanopartikül hacimsel oranı ile azalırken, boru merkez uzunluğu boyunca basınç değerleri artmıştır. Manyetik alan ile meydana gelen hız düşüşü nanopartikül eklenmesi ile meydana gelen düşüşten daha fazladır. Aynı şekilde, manyetik alan ile meydana gelen basınç artışı, nanopartikül eklenmesi ile meydana gelen basınç artışından daha fazladır. Sonuç olarak, hem manyetik alan kuvveti hem de nanopartikül ilavesi akışkan hareketi üzerinde etkilidir. Ayrıca, manyetik alan kuvveti ile nanoakışkan hareketi kontrol altında tutulabilir.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.