Emulsion fuel is an unconventional fuel for diesel engines, which can be used without modifications in the engine. The benefits of an emulsion fuel include lowering the emissions of nitrogen oxides (NO x ) and particulate matter (PM) which are harmful to health and cause diesel engines to suffer. This paper explains in detail the effect of water in the emulsion fuel on the emissions of NO x , PM, carbon monoxide (CO), hydrocarbon (HC), smoke and exhaust temperature. Experimental results from various researchers show a decrease in the NO x and PM emissions simultaneously. However, the results with the increasing water percentage in emulsion fuel are not consistent for HC and CO emissions. The water content in emulsion fuel affects the combustion and reduces the peak temperature in the combustion chamber. On the other hand, microexplosion phenomenon occurs and causes an increase in the volatility of diesel fuel which improves the combustion efficiency.

No abstract

No abstract

Purpose Diesel engine can produce power more efficiently with lower exhaust emissions when operated at optimum input parameter settings. To achieve this goal, the purpose of this paper is to optimize the input parameters of diesel engine which will lead to optimum performance and exhaust emissions. Design/methodology/approach To achieve the goal of improving diesel engine performance and exhaust emissions, four input parameters were considered in the study. Five different levels of each input parameter were taken. Four response variables under no load, half load and full load conditions were recorded. Experiments were performed in random manner according to selected Taguchi L25 orthogonal array. The data were analyzed using grey relational analysis coupled with principal component analysis. Analysis of S/N ratio was performed to obtain the optimum combination of input parameters. The grey relational grade at optimum setting of the input parameters was obtained by regression analysis. Findings Results of the current research work give the optimum input parameter settings for no load, half load and full load conditions of diesel engine. Engine produces power more efficiently with low exhaust emissions when operated at these optimum settings. Practical implications In view of the compliance to the stringent air pollution norms of the nations and fast depleting fossil fuels, it is of the utmost importance to design and operate the engine in the optimum range of its input parameters so that it produces more power with low exhaust emissions. This paper aims at optimizing input parameters of diesel engine to improve performance and exhaust emissions. Results of the study presented in this paper are significantly useful for diesel engine-related researchers and professionals. Originality/value From the literature review, it appears that only few researchers have conducted studies pertaining to the optimization of the input parameters of diesel engine to improve performance or exhaust emissions. Although few studies related to the optimization of compression ratio, fuel injection timing, fuel injection pressure and air pressure have been reported, no work related to optimization of temperature and pressure of turbocharged air has been reported. Therefore, the main focus of the current research work is on optimizing the charge air temperature and pressure with respect to performance and exhaust emissions.

No abstract