This study has been conducted to analyse the effects of turning the Inconel X-750 superalloy, which is a member of a nickel-based superalloy family that is frequently preferred in the aerospace and nuclear energy industries in particular, under minimum quantity lubrication (MQL), cryogenic liquid nitrogen (LN2) and carbon dioxide gas (CO2) cooling/lubrication conditions, with different cutting speeds (V c = 65, 95, 125 and 155 m/min) and constant feed rate (f = 0.1 mm/revolution) and cutting depth (a = 0.5 mm) parameters, on the processability of Inconel X-750, hence on the surface integrity. In this context, the results obtained from the tests have been comparatively examined through surface roughness, tool wear and chip formation. Comparison results show that the cryogenic carbon dioxide method has generally provided the best surface roughness and tool wear values. The MQL method has provided the best chip formation.
Nikel alaşımları, yüksek sıcaklıklarda mekanik özelliklerini koruyabilme ve korozyona karşı yüksek direnç özellikleri nedeniyle, yüksek sıcaklık ve korozyona maruz kalan havacılık ve uzay, nükleer enerji, petrokimya endüstrisi gibi güvenlik ve sürdürülebilirliğin hayati önem taşıdığı kritik endüstri uygulamalarında önemli yer tutar. Nikel alaşımlarının gelişmiş özellikleri, bu alaşımların talaşlı imalatı sırasında yüksek kesme kuvvetleri, kesme bölgesi sıcaklığı ve sonrasında birtakım problemlerin oluşmasına neden olmaktadır. Birbirleriyle oldukça ilişkili bu problemlere çözüm olarak bazı yaklaşımlar geliştirilmiştir. Bu çalışma; literatürdeki, nikel alaşımlarının farklı soğutma/yağlama koşullarında, farklı talaşlı imalat yöntemleriyle işlenmesi ile ilgili çalışmaların talaşlı imalat sırasında oluşan kesme kuvvetleri üzerindeki etkilerinin bir incelemesini sunar. Yapılan deneysel çalışmaların çoğunda, karakteristiklerine göre kuru, konvansiyonel, Minimum miktarda yağlama (MQL) ve kriyojenik koşullarda işleme metodları uygulanmıştır. Ancak bu metodların yanısıra, etkin bir uygulama için kesme parametreleri, takım kaplaması, nozul konumları gibi birçok unsurun göz önüne alınması gerekmektedir. Çalışmalar, kesme kuvvetlerini azaltma konusunda kriyojenik metodun yüksek hızlarda diğer metodların çoğuna göre oldukça etkili olduğunu göstermiştir. Ancak kriyojenik metod, tek başına yeterli olmamakta ve alternatif olarak Kriyojenik ve MQL metodlarının birleşimi olan hibrid KriyoMQL soğutma/ yağlama metodunun kullanımı yaygınlaşmaya başlamıştır. Literatürdeki araştırmalarında ışığına bu metodun nikel alaşımlarının talaşlı imalatında kesme kuvvetlerinin ve kesme bölgesi sıcaklıklarının azaltılmasında gelecekte etkin bir metod olabileceği sonucuna varılmıştır.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.