The installation of photovoltaic (PV) system for electrical power generation has gained a substantial interest in the power system for clean and green energy. However, having the intermittent characteristics of photovoltaic, its integration with the power system may cause certain uncertainties (voltage fluctuations, harmonics in output waveforms, etc.) leading towards reliability and stability issues. In PV systems, the power electronics play a significant role in energy harvesting and integration of grid-friendly power systems. Therefore, the reliability, efficiency, and cost-effectiveness of power converters are of main concern in the system design and are mainly dependent on the applied control strategy. This review article presents a comprehensive review on the grid-connected PV systems. A wide spectrum of different classifications and configurations of grid-connected inverters is presented. Different multi-level inverter topologies along with the modulation techniques are classified into many types and are elaborated in detail. Moreover, different control reference frames used in inverters are presented. In addition, different control strategies applied to inverters are discussed and a concise summary of the related literature review is presented in tabulated form. Finally, the scope of the research is briefly discussed.
In this work, a non-isolated DC–DC converter is presented that combines a voltage doubler circuit and switch inductor cell with the single ended primary inductor converter to achieve a high voltage gain at a low duty cycle and with reduced component count. The converter utilizes a single switch that makes its control very simple. The voltage stress across the semiconductor components is less than the output voltage, which makes it possible to use the diodes with reduced voltage rating and a switch with low turn-on resistance. In particular, performance principle of the proposed converter along with the steady state analysis such as voltage gain, voltage stress on semiconductor components, and design of inductors and capacitors, etc., are carried out and discussed in detail. Moreover, to regulate a constant voltage at a DC-link capacitor, back propagation algorithm-based adaptive control schemes are designed. These adaptive schemes enhance the system performance by dynamically updating the control law parameters in case of PV intermittency. Furthermore, a proportional resonant controller based on Naslin polynomial method is designed for the current control loop. The method describes a systematic procedure to calculate proportional gain, resonant gain, and all the coefficients for the resonant path. Finally, the proposed system is simulated in MATLAB and Simulink software to validate the analytical and theoretical concepts along with the efficacy of the proposed model.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.