a b s t r a c tIn this study, T-Shape friction test was redesigned to make it more suitable for application to microforming processes. Workpiece with aspect ratio (length/diameter) of 5 was proposed in order to ease workpiece handling. The die geometry was also modified from the original test to improve friction sensitivity especially within the range of friction factors commonly observed in metal forming. Geometric deviation of the die was simulated using Deform-2D to establish the acceptable tolerance for the fabrication. The effect of variation in workpiece mechanical properties on the test behavior was also investigated through Deform-2D simulation. Based on simulations on a 1 mm diameter copper workpiece, a tolerance of 0.01 mm (1% of workpiece diameter) was found to be the most suitable for the die fabrication. In addition, it was shown that variations in workpiece mechanical properties of up to 10% do not significantly influence the friction test results. Ultimately, T-Shape test experiment was conducted using copper workpieces to examine how the test complied with the friction behavior observed in the experiment.
The frictional behaviors between metal forming tool and three different metallic materials were evaluated using the modified T-Shape test. A mathematical function is proposed to describe the calibration curves for different friction coefficients. Round bars of copper, aluminum and silver of diameter 1 mm and length 5 mm were used as the workpieces to study the material influence on friction factor, m, during unlubricated microforming process through comparison between simulation and experimental results. Furthermore, various lubricants were used with the aluminum and copper to examine their performance in microforming. The results have shown that the workpiece materials not only determine the friction factor, m, during unlubricated microforming, but also influence the performance of lubricants. Lubricant can be completely ineffective and may not produce discernible friction reduction in microforming, unlike in *Manuscript Click here to view linked References Highlights x Mathematical function for calibration curves in modified T-shape test is proposed. x The effect of workpiece materials on the microforming friction coefficients is studied. x The effect of lubricants on the microforming friction coefficients is extensively studied. x A phenomenological friction model is proposed for liquid lubrication microforming.
In this paper, the sensitivity of T-Shape test to friction conditions was evaluated by observing the extrusion height and load curves throughout the normalized stroke (relative to workpiece diameter). Using the finite element code Deform 2D and assuming plane strain approximation, the effects of changing die geometry to the T-Shape test results were investigated. The sensitivity of the T-Shape test was also improved by introducing the double-sloped T-Shape design. The double-sloped T-Shape test was able to separate the extrusion height curves for shear coefficient of friction 0.0 to 0.4 which was unable to distinguish using the original T-Shape setup.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.