Improvements in control of renewable energy-based microgrids are a growing area of interest. A hierarchical control structure is popularly implemented to regulate key parameters such as power sharing between generation sources, system frequency and node voltages. A distributed control infrastructure is realized by means of a communication network that spans the micro-distribution grid. Measured and estimated values, as well as corrective signals are transmitted across this network to effect required system regulation. However, intermittent latencies and failures of component communication links may result in power imbalances between generation sources, deviations in node voltages and system frequency. This paper proposes a hierarchical control structure to regulate the operation of an islanded AC microgrid experiencing communication link failures. The proposed strategy aims to virtually sub-divide the microgrid into controllable "islands". Thereafter, active power sharing, frequency and voltage restoration is achieved by competing converter systems through multi-agent consensus. The effectiveness of the proposed methodology has been verified through stability analyses using system wide mathematical small signal models and case study simulations in MATLAB, Simpower systems.

No abstract

Self-governed micro power networks are a promising solution for meeting the energy needs of isolated communities not having access to regular transmission networks. The control of such isolated networks requires regulation and “fair” sharing of several power generation and storage resources as well as efficient peer-to-peer coordination between power converters operating in the network. The regulation of key parameters as voltage, frequency and power sharing is to be ensured for the system to operate optimally. This paper proposes a new, de-centralized, and hierarchical control approach for power inverters in isolated micro networks with multi-layered controls, each addressing the regulation of key system parameters. The proposed scheme uses distributed quasi-averaging estimators at each participating node to achieve resilience towards disturbances caused by delayed transmission of measurement and control signals in the data acquisition and information exchange layer. Detailed system models are developed using MATLAB and Sim-power systems to test the effectiveness of the proposed scheme under varying control and network scenarios. The results of these studies are presented as pole zero evolutions, stability margins and case study wise simulations. The studies carried out verify the validity of the proposed control strategy for micro-distribution networks.

This paper focuses on the study of a soft-switched unidirectional boost-type rectifier employing a snubber circuit, used as a front-end converter stage in high-power applications. The proposed rectifier operates with soft switching which results in high efficiency and low cost. The switching losses and electromagnetic interference (EMI) result in poor efficiency, therefore, soft switching techniques need to be developed to improve the efficiency. To achieve the desired result, the snubber circuit which consists of a lossless snubber switch cell and a resonant inductor, is introduced in the above-mentioned converter. The topology of the proposed converter is derived from the conventional T-type three-level boost rectifier. The circuit operation, theoretical analysis, and simulation of the converter in MATLAB/Simulink environment are carried out. Finally, a 10 kW laboratory setup of the proposed soft-switched unidirectional rectifier is built. The experimental results obtained validate the theoretical analysis of the circuit.

This paper presents a comparative analysis of a new topology based on an asymmetric hybrid modular multilevel converter (AHMMC) with recently proposed multilevel converter topologies. The analysis is based on various parameters for medium voltage-high power electric traction system. Among recently proposed topologies, few converters have been analysed through simulation results. In addition, the study investigates AHMMC converter which is a cascade arrangement of H-bridge with five-level cascaded converter module (FCCM) in more detail. The key features of the proposed AHMMC includes: reduced switch losses by minimizing the switching frequency as well as the components count, and improved power factor with minimum harmonic distortion. Extensive simulation results and low voltage laboratory prototype validates the working principle of the proposed converter topology. Furthermore, the paper concludes with the comparison factors evaluation of the discussed converter topologies for medium voltage traction applications.