Transdermal drug delivery systems (TDDSs) have become innovative, fascinating drug delivery methods intended for skin application to achieve systemic effects. TDDSs overcome the drawbacks associated with oral and parenteral routes of drug administration. The current investigation aimed to design, evaluate and optimize methotrexate (MTX)-loaded transdermal-type patches having ethyl cellulose (EC) and hydroxypropyl methyl cellulose (HPMC) at different concentrations for the local management of psoriasis. In vitro release and ex vivo permeation studies were carried out for the formulated patches. Various formulations (F1–F9) were developed using different concentrations of HPMC and EC. The F1 formulation having a 1:1 polymer concentration ratio served as the control formulation. ATR–FTIR analysis was performed to study drug–polymer interactions, and it was found that the drug and polymers were compatible with each other. The formulated patches were further investigated for their physicochemical parameters, in vitro release and ex vivo diffusion characteristics. Different parameters, such as surface pH, physical appearance, thickness, weight uniformity, percent moisture absorption, percent moisture loss, folding endurance, skin irritation, stability and drug content uniformity, were studied. From the hydrophilic mixture, it was observed that viscosity has a direct influence on drug release. Among all formulated patches, the F5 formulation exhibited 82.71% drug release in a sustained-release fashion and followed an anomalous non-Fickian diffusion. The permeation data of the F5 formulation exhibited about a 36.55% cumulative amount of percent drug permeated. The skin showed high retention for the F5 formulation (15.1%). The stability study indicated that all prepared formulations had very good stability for a period of 180 days. Therefore, it was concluded from the present study that methotrexate-loaded transdermal patches with EC and HPMC as polymers at different concentrations suit TDDSs ideally and improve patient compliance for the local management of psoriasis.
This study attempted to develop and evaluate controlled-release matrix-type transdermal patches with different ratios of hydrophilic polymers (sodium carboxymethylcellulose and hydroxypropyl methylcellulose) for the local delivery of methotrexate. Transdermal patches were formulated by employing a solvent casting technique using blends of sodium carboxymethylcellulose (CMC-Na) and hydroxypropylmethylcellulose (HPMC) polymers as rate-controlling agents. The F1 formulated patch served as the control formulation with a 1:1 polymer concentration. The F9 formulation served as our optimized formulation due to suitable physicochemical properties yielded through the combination of CMC-Na and HPMC (5:1). Drug excipient compatibilities (ATR-FTIR) were performed as a preformulation study. The ATR-FTIR study depicted great compatibility between the drug and the polymers. Physicochemical parameters, kinetic modeling, in vitro drug release, ex vivo drug permeation, skin drug retention, and in vivo studies were also carried out for the formulated patches. The formulated patches exhibited a clear, smooth, elastic nature with good weight uniformity, % moisture uptake, drug content, and thickness. Physicochemical characterization revealed folding endurance ranging from 62 ± 2.21 to 78 ± 1.54, tensile strength from 9.42 ± 0.52 to 12.32 ± 0.72, % swelling index from 37.16 ± 0.17 to 76.24 ± 1.37, and % drug content from 93.57 ± 5.34 to 98.19 ± 1.56. An increase in the concentration of the CMC-Na polymer (F9) resulted in increased drug release from the formulated transdermal patches. Similarly, drug permeation and retention were found to be higher in the F9 formulation compared to the other formulations (F1–F8). A drug retention analysis revealed that the F9 formulation exhibited 13.43% drug retention in the deep layers of the skin compared to other formulations (F1–F8). The stability study indicated that, during the study period of 60 days, no significant changes in the drug content and physical characteristics were found. ATR-FTIR analysis of rabbit skin samples treated with the formulated transdermal patches revealed that hydrophilic polymers mainly affect the skin proteins (ceramide and keratins). A pharmacokinetic profile revealed Cmax was 1.77.38 ng/mL, Tmax was 12 h, and t1/2 was 17.3 ± 2.21. In vivo studies showed that the skin drug retention of F9 was higher compared to the drug solution. These findings reinforce that methotrexate-based patches can possibly be used for the management of psoriasis. This study can reasonably conclude that methotrexate transdermal matrix-type patches with CMC-Na and HPMC polymers at different concentrations effectively sustain drug release with prime permeation profiles and better bioavailability. Therefore, these formulated patches can be employed for the potential management of topical diseases, such as psoriasis.
Background: The aim of the present research was to formulate and evaluate curcumin hydrogel and to investigate the potential of natural essential oils as permeation enhancers. Methods: Curcumin 2% w/w hydrogel containing various concentrations of eucalyptus oil, aloe vera oil and clove oil was developed using carboxy methyl cellulose (CMC) as a gelling agent. Differential scanning calorimetry and Fourier Transform infrared spectroscopy were used to evaluate the compatibility between the drug and the excipients. In order to assess the efficacy of the formulation; rheological properties, skin irritation studies, in vitro release, ex vivo permeation and retention studies were conducted. Results: DSC and FTIR suggest no in-compatibility between curcumin and excipients. Studies proved that addition of suitable natural permeation enhancers to the hydrogels improved the in vitro release and ex vivo permeation and retention of curcumin. From the various natural essential oils, the aloe vera oil at a concentration of 3% w/w had the greatest effect on the permeability rate and skin retention of the Curcumin and produces the highest enhancement ratio amongst all the concentrations of essential oils examined. Conclusion: Aloe vera oil enhances the permeation of curcumin across the skin by altering the complex structure of the stratum corneum without itself undergoing any change. The developed curcumin hydrogels along with natural essential oils may present an effective choice regarding skin infection/wound healing.
This study aims to develop chitosan-based voriconazole nanoparticles (NPs) using spray-drying technique. The effect of surfactants and polymers on the physicochemical properties, in vitro release, and permeation of NPs was investigated. The prepared NPs containing various surfactants and polymers (e.g., Tween 20 (T20), Tween 80 (T80), sodium lauryl sulfate (SLS), propylene glycol (PG), and Polyethylene glycol-4000 (PEG-4000)) were physiochemically evaluated for size, zeta potential, drug content, percent entrapment efficiency, in vitro release, and permeation across rats’ skin. A Franz diffusion cell was used for evaluating the in vitro release and permeation profile. The voriconazole-loaded NPs were investigated for antifungal activity against Candida albicans (C. albicans). The prepared NPs were in the nano range (i.e., 160–500 nm) and positively charged. Images taken by a scanning electron microscope showed that all prepared NPs were spherical and smooth. The drug content of NPs ranged from 75% to 90%. Nanoparticle formulations exhibited a good in vitro release profile and transport voriconazole across the rat’s skin in a slow control release manner. The NPs containing SLS, T80, and PG exhibited the best penetration and skin retention profile. In addition, the formulation exhibited a potential antifungal effect against C. albicans. It was concluded that the development of chitosan NPs has a great potential for the topical delivery of voriconazole against fungal infection.
(1) Background: The present study aimed to prepare chitosan-coated nanoemulsion gel containing 5-fluorouracil for enhanced topical delivery. (2) Methods: To formulate the nanoemulsion gel, oleic acid was used as the oil phase and Carbopol 940 as a gelling agent. Chitosan was used as a coating agent to control the release of 5-FU. Drug–excipient compatibility was evaluated using ATR-FTIR. The prepared nanoemulsion formulations were characterized based on particle size distribution, zeta potential, % encapsulation efficiency and drug content. In vitro drug release, skin drug retention and ex vivo permeation profiles were performed across rat skin using a Franz diffusion cell. Skin irritation experiments were also conducted on rats to examine the irritation potential of the formulations. (3) Results: It was found that the drug and excipients were compatible and chitosan successfully coated 5-FU, as demonstrated by ATR-FTIR results. The introduction of chitosan increased the size and zeta potential of the nanoemulsion. The 5-FU release in vitro was significantly lowered in the case of chitosan-decorated nanoemulsion (5-FU-C-NE), whereas the permeation and skin drug retention were higher in the case of 5-FU-C-NE. The formulations were proven non-irritant to the skin of the rats. The optimized formulation of the nanoemulsion was introduced into 1% Carbopol 940 gel. Incorporating the nanoemulsion into the gel further reduced the drug release in vitro and ex vivo permeation, whereas the retention of the drug in the skin was significantly increased (ANOVA; p < 0.05). The increase in skin retention was due to the presence of chitosan and Carbopol 940. The in vitro and ex vivo results were also confirmed with in vivo studies. Incorporating nanoemulsion into gel has resulted in higher Tmax, longer half-life and greater skin drug retention. (4) Conclusion: The results suggest that chitosan-decorated nanoemulsion gel is safe and can potentially be used to promote 5-FU skin retention, which is ideal for skin diseases such as melanoma.
The study aimed to synthesize non-noxious, clean, reliable, and green sulfur nanoparticles (SNPs) from Citrus limon leaves. The synthesized SNPs were used to analyze particle size, zeta potential, UV–visible spectroscopy, SEM, and ATR-FTIR. The prepared SNPs exhibited a globule size of 55.32 ± 2.15 nm, PDI value of 0.365 ± 0.06, and zeta potential of −12.32 ± 0.23 mV. The presence of SNPs was confirmed by UV–visible spectroscopy in the range of 290 nm. The SEM image showed that the particles were spherical with a size of 40 nm. The ATR-FTIR study showed no interaction, and all the major peaks were preserved in the formulations. An antimicrobial and antifungal study of SNPs was carried out against Gram-positive bacteria (Staph. aureus, Bacillus), Gram-negative bacteria (E. coli and Bordetella), and fungal strains (Candida albicans). The study showed that Citrus limon extract SNPs exhibited better antimicrobial and antifungal activities against Staph. aureus, Bacillus, E. coli, Bordetella, and Candida albicans at a minimal inhibitory concentration of 50 μg/mL. Different antibiotics were used alone and in combination with SNPs of Citrus limon extract to evaluate their activity against various strains of bacteria and fungal strains. The study showed that using SNPs of Citrus limon extract with antibiotics has a synergistic effect against Staph.aureus, Bacillus, E. coli, Bordetella, and Candida albicans. SNPs were embedded in nanohydrogel formulations for in vivo (wound healing) studies. In preclinical studies, SNPs of Citrus limon extract embedded within a nanohydrogel formulation (NHGF4) have shown promising results. To be widely used in clinical settings, further studies are needed to evaluate their safety and efficacy in human volunteers.
(1) Background: Bacitracin is a broad spectrum antibiotic that is used against various microorganisms. Chitosan is a natural polymer that has been widely investigated as an antimicrobial agent for preventing and treating infections owing to its intrinsic antimicrobial properties, as well as its ability to effectively deliver extrinsic antimicrobial compounds to infected areas. Topical drug delivery offers important benefits for improving the therapeutic effect and reducing systemic side effects of administered compounds/drugs. The topical use of chitosan-decorated bacitracin-loaded cream improves the permeation of the drug across the skin and enhances the drug bioavailability by prolonging the residence time of the drug when applied topically, as well as producing synergistic effects and reducing the side effects of the drug. Topical chitosan-decorated cream can be a promising approach to administer the drug more efficiently and enhance the efficacy of treatment in wound healing and antibacterial activity. (2) Methods: This study was conducted to prepare, assess and investigate the synergistic antibacterial activity of a chitosan-coated bacitracin cream. The results were compared to the antibacterial activity of simple bacitracin-loaded cream. The prepared cream was evaluated for various in vitro characteristics such as rheology, pH, viscosity, drug content and antibacterial activity studies. (3) Result: The formulations were found to be stable regarding color, liquefaction and phase separation at all accelerated conditions. It was observed that with time, substantial variations in the pH of the preparations were found. The introduction of chitosan results in controlled release of the drug from the formulations. The antibacterial activity of the formulated creams was assessed with the disc diffusion method against Staphylococcus aureus(ATCC),Escherichiacoli (STCC),Pseudomonas aeruginosa(ATCC) and Bacillus cereus(ATCC). The strains, E. coli, S. aureus, P. aeruginosa and B. cereus were susceptible to 50 µg chitosan-decorated bacitracin cream, showing inhibition zones of 10 ± 0.6, 34 ± 1.5, 31 ± 0.76 and 21 ± 2.02 mm, respectively. The zones of inhibition for simple bacitracin-loaded cream were significantly smaller than chitosan-decorated cream, at 2 ± 0.2, 28 ± 0.92, 15 ± 0.5 and 11 ± 1.25 mm (ANOVA; p < 0.05), respectively. (4) Conclusion: It was observed that the zones of inhibition of simple bacitracin-loaded cream were significantly smaller than those of chitosan-decorated bacitracin-loaded cream. Chitosan synergistically improves the antimicrobial activity of bacitracin. Hence, the developed formulation was effective and should be considered as a suitable candidate for topical management of skin infections and wound healing.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.