The control chart is a very popular tool of statistical process control. It is used to determine the existence of special cause variation to remove it so that the process may be brought in statistical control. Shewhart-type control charts are sensitive for large disturbances in the process, whereas cumulative sum (CUSUM)-type and exponentially weighted moving average (EWMA)-type control charts are intended to spot small and moderate disturbances. In this article, we proposed a mixed EWMA-CUSUM control chart for detecting a shift in the process mean and evaluated its average run lengths. Comparisons of the proposed control chart were made with some representative control charts including the classical CUSUM, classical EWMA, fast initial response CUSUM, fast initial response EWMA, adaptive CUSUM with EWMA-based shift estimator, weighted CUSUM and runs rules-based CUSUM and EWMA. The comparisons revealed that mixing the two charts makes the proposed scheme even more sensitive to the small shifts in the process mean than the other schemes designed for detecting small shifts.

d Shewhart, exponentially weighted moving average (EWMA), and cumulative sum (CUSUM) charts are famous statistical tools, to handle special causes and to bring the process back in statistical control. Shewhart charts are useful to detect large shifts, whereas EWMA and CUSUM are more sensitive for small to moderate shifts. In this study, we propose a new control chart, named mixed CUSUM-EWMA chart, which is used to monitor the location of a process. The performance of the proposed mixed CUSUM-EWMA control chart is measured through the average run length, extra quadratic loss, relative average run length, and a performance comparison index study. Comparisons are made with some existing charts from the literature. An example with real data is also given for practical considerations.

On the performance of different control charting rules Riaz, M.; Mehmood, R.; Does, R.J.M.M. General rightsIt is not permitted to download or to forward/distribute the text or part of it without the consent of the author(s) and/or copyright holder(s), other than for strictly personal, individual use, unless the work is under an open content license (like Creative Commons). Disclaimer/Complaints regulationsIf you believe that digital publication of certain material infringes any of your rights or (privacy) interests, please let the Library know, stating your reasons. In case of a legitimate complaint, the Library will make the material inaccessible and/or remove it from the website. In the literature a number of control charting rules are proposed to decide whether a process is in control or out of control. Some issues with these rules will be highlighted in this article. By redefining and listing a set of rules we will evaluate their performance on theX, R, S and S 2 charts. Also we will compare the performance of these rules using their power curves to figure out the superior ones. Application of a few of these rules with real data sets will show their detection ability and use for practitioners.

Enhancing the performance of EWMA chartsAbbas, N.; Riaz, M.; Does, R.J.M.M. General rightsIt is not permitted to download or to forward/distribute the text or part of it without the consent of the author(s) and/or copyright holder(s), other than for strictly personal, individual use, unless the work is under an open content license (like Creative Commons). Disclaimer/Complaints regulationsIf you believe that digital publication of certain material infringes any of your rights or (privacy) interests, please let the Library know, stating your reasons. In case of a legitimate complaint, the Library will make the material inaccessible and/or remove it from the website. Please Ask the Library: http://uba.uva.nl/en/contact, or a letter to: Library of the University of Amsterdam, Secretariat, Singel 425, 1012 WP Amsterdam, The Netherlands. You will be contacted as soon as possible. Control charts are extensively used in processes and are very helpful in determining the special cause variations so that a timely action may be taken to eliminate them. One of the charting procedures is the Shewhart-type control charts, which are used mainly to detect large shifts. Two alternatives to the Shewhart-type control charts are the cumulative (CUSUM) control charts and the exponentially weighted moving average (EWMA) control charts that are specially designed to detect small and moderately sustained changes in quality. Enhancing the ability of design structures of control charts is always desirable and one may do it in different ways. In this article, we propose two runs rules schemes to be applied on EWMA control charts and evaluate their performance in terms of the Average Run Length (ARL). Comparisons of the proposed schemes are made with some existing representative CUSUM and EWMA-type counterparts used for small and moderate shifts, including the classical EWMA, the classical CUSUM, the fast initial response CUSUM and EWMA, the weighted CUSUM, the double CUSUM, the distribution-free CUSUM and the runs rules schemes-based CUSUM. The findings of the study reveal that the proposed schemes are able to perform better than all the other schemes under investigation.

Control charts for location based on different sampling schemesMehmood, R.; Riaz, M.; Does, R.J.M.M. General rightsIt is not permitted to download or to forward/distribute the text or part of it without the consent of the author(s) and/or copyright holder(s), other than for strictly personal, individual use, unless the work is under an open content license (like Creative Commons). Disclaimer/Complaints regulationsIf you believe that digital publication of certain material infringes any of your rights or (privacy) interests, please let the Library know, stating your reasons. In case of a legitimate complaint, the Library will make the material inaccessible and/or remove it from the website. Please Ask the Library: http://uba.uva.nl/en/contact, or a letter to: Library of the University of Amsterdam, Secretariat, Singel 425, 1012 WP Amsterdam, The Netherlands. You will be contacted as soon as possible. This article may be used for research, teaching, and private study purposes. Any substantial or systematic reproduction, redistribution, reselling, loan, sub-licensing, systematic supply, or distribution in any form to anyone is expressly forbidden.The publisher does not give any warranty express or implied or make any representation that the contents will be complete or accurate or up to date. The accuracy of any instructions, formulae, and drug doses should be independently verified with primary sources. The publisher shall not be liable for any loss, actions, claims, proceedings, demand, or costs or damages whatsoever or howsoever caused arising directly or indirectly in connection with or arising out of the use of this material. Statistics, 2013 Vol. 40, No. 3, 483-494, http Control charts are the most important statistical process control tool for monitoring variations in a process. A number of articles are available in the literature for theX control chart based on simple random sampling, ranked set sampling, median-ranked set sampling (MRSS), extreme-ranked set sampling, double-ranked set sampling, double median-ranked set sampling and median double-ranked set sampling. In this study, we highlight some limitations of the existing ranked set charting structures. Besides, we propose different runs rules-based control charting structures under a variety of sampling strategies. We evaluate the performance of the control charting structures using power curves as a performance criterion. We observe that the proposed merger of varying runs rules schemes with different sampling strategies improve significantly the detection ability of location control charting structures. More specifically, the MRSS performs the best under both single-and double-ranked set strategies with varying runs rules schemes. We also include a real-life example to explain the proposal and highlight its significance for practical data sets. Journal of Applied

Statistical process control (SPC) is an important application of statistics in which the outputs of production processes are monitored. Control charts are an important tool of SPC. A very popular category is the Shewhart'sX-chart used to monitor the mean of a process characteristic. Two alternatives to the Shewhart'sX-chart are the cumulative sum and exponentially weighted moving average (EWMA) charts which are designed to detect moderate and small shifts in the process mean. Targeting on small and moderate shifts in the process mean, we propose an EWMA-type control chart which utilizes a single auxiliary variable. The regression estimation technique for the mean is used in defining the control structure of the proposed chart. It is shown that the proposed chart is performing better than its univariate and bivariate competitors which are also designed for detecting small shifts.

Improving the performance of CUSUM chartsRiaz, M.; Abbas, N.; Does, R.J.M.M. General rightsIt is not permitted to download or to forward/distribute the text or part of it without the consent of the author(s) and/or copyright holder(s), other than for strictly personal, individual use, unless the work is under an open content license (like Creative Commons). Disclaimer/Complaints regulationsIf you believe that digital publication of certain material infringes any of your rights or (privacy) interests, please let the Library know, stating your reasons. In case of a legitimate complaint, the Library will make the material inaccessible and/or remove it from the website. Please Ask the Library: http://uba.uva.nl/en/contact, or a letter to: Library of the University of Amsterdam, Secretariat, Singel 425, 1012 WP Amsterdam, The Netherlands. You will be contacted as soon as possible. The control chart is an important statistical technique that is used to monitor the quality of a process. Shewhart control charts are used to detect larger disturbances in the process parameters, whereas CUSUM and EWMA charts are meant for smaller and moderate changes. Runs rules schemes are generally used to enhance the performance of Shewhart control charts. In this study, we propose two runs rules schemes for the CUSUM charts. The performance of these two schemes is compared with the usual CUSUM, the weighted CUSUM, the fast initial response CUSUM and the usual EWMA schemes. The comparisons revealed that the proposed schemes perform better for small and moderate shifts, whereas they reasonably maintain their efficiency for large shifts as well.

Control charts are widely used for process monitoring. They show whether the variation is due to common causes or whether some of the variation is due to special causes. To detect large shifts in the process, Shewhart-type control charts are preferred. Cumulative sum (CUSUM) and exponentially weighted moving average (EWMA) control charts are generally used to detect small and moderate shifts. Shewhart-type control charts (without additional tests) use only current information to detect special causes, whereas CUSUM and EWMA control charts also use past information. In this article, we proposed a control chart called progressive mean (PM) control chart, in which a PM is used as a plotting statistic. The proposed chart is designed such that it uses not only the current information but also the past information. Therefore, the proposed chart is a natural competitor for the classical CUSUM, the classical EWMA and some recent modifications of these two charts. The conclusion of this article is that the performance of the proposed PM chart is superior to the compared ones for small and moderate shifts, and its performance for large shifts is better (in terms of the average run length).