Kabupaten Sumedang berada pada wilayah pegunungan dan perbukitan sehingga meningkatkan kemungkinkan untuk terjadinya bencana tanah longsor yang dapat menimbulkan kerugian baik secara materi ataupun nonmateri. Untuk mencegah dan meminimalisir dampak dari bencana tersebut diperlukan pengetahuan mendetail mengenai bencana tanah longsor itu sendiri. Berdasarkan hal tersebut maka dilakukan penelitian ini dengan tujuan untuk melakukan pemetaan dan memberikan informasi tentang wilayah-wilayah yang mempunyai kerawanan terjadinya bencana longsor di Kabupaten Sumedang yang kemudian diharapkan hasil dari penelitian ini dapat dijadikan acuan dalam melakukan upaya mitigasi serta diharapkan dapat meminimalkan dampak yang diakibatkan jika terjadinya bencana tanah longsor pada wilayah Kabupaten Sumedang. Penelitian ini memanfaatkan metode skoring, weighting dan overlay yang terdapat pada SIG dalam melakukan pemetaan daerah rawan longsor dengan mengacu terhadap nilai dan parameter yang dikeluarkan oleh Puslittanak 2004. Berdasarkan penelitian yang telah dilakukan maka diketahui bahwa Kabupaten Sumedang didominasi oleh jenis tanah alluvial, jenis batuan vulkanik, kemiringan lereng dengan kisaran 15-30%, dan memiliki curah hujan yang sangat tinggi. Hasil analisis yang dilakukan didapatkan bahwa Kabupaten Sumedang memiliki tingkat kerawanan longsor yang berada pada kategori sedang sampai dengan tinggi.
Tsunami Selat Sunda yang terjadi pada akhir tahun 2018 akibat deformasi (longsor) Gunung Anak Krakatau (GAK) tidak memiliki Early Warning System (EWS) yang memadai bahkan tidak terdeteksi oleh seismogram dengan jelas. Peristiwa itu menunjukkan bahwa pemantauan deformasi GAK sangat diperlukan. Penelitian ini bertujuan untuk mengetahui proses deformasi GAK sebelum tsunami menggunakan metode DInSAR. Metode ini memanfaatkan perbedaan dua fase atau lebih citra SAR dengan akuisisi yang berbeda untuk memperoleh topografi dan deformasi. Data yang digunakan adalah sepasang citra Sentinel-1 yang diakuisisi pada periode 7-19 Desember 2018. Penelitian ini berhasil menunjukkan GAK telah mengalami deformasi beberapa hari sebelum tsunami Selat Sunda pada 22 Desember 2018 terjadi. Nilai deformasi GAK pada periode ini sebesar -0.12 sampai 0.04 meter relatif terhadap Line of Sight (LOS). Hasil tersebut menunjukkan deformasi yang terjadi mencakup 94 Ha luas area GAK dengan ± 32,036 m 3 material vulkanik yang bergerak dominan ke arah barat daya. Volume material yang cukup banyak ini tidak menghasilkan tsunami, diperkirakan karena periode pergerakan tersebut terjadi secara perlahan/tidak seketika yaitu pada rentang 12 hari. Material longsoran tertumpuk dan menjadi tidak stabil, kemudian terjadi longsoran serentak yang kemungkinan dipicu oleh banyaknya aktivitas vulkanik GAK akhirnya memicu terjadinya tsunami pada 22 Desember 2018. Temuan ini menunjukkan bahwa citra SAR mampu mengidentifikasi adanya pergerakan massa pada lereng GAK sebelum tsunami terjadi, sehingga dapat digunakan untuk monitoring permukaan GAK sebagai sistem peringatan dini pada deformasi yang berpotensi menyebabkan tsunami di kemudian hari.
The gravity method is a geophysical exploration method to measure variations in the acceleration of gravity on the surface of the earth in response to variations in rocks that exist beneath the surface. In gravity exploration requires a preliminary picture as a reference for measurement. This study aims to make forward modeling synthetic OCTAVE based using synthetic data on subsurface rock structures, so as to produce intrusion and fracture models based on differences in the value of the acceleration of gravity from one point to another on the surface of the earth. Synthetic modeling with the geological parameter approach of the study area is based on variations in the price of rock density. The model parameters used in intrusion modeling are the density value of 2.7 g/cm3 and the depth of 850 meters while the fracture modeling uses a density value of 2.7 g/cm3 with a depth of 350 meters and 360 meters and a thickness of 500 meters. From intrusion modeling, the gravity vertical component of attraction force is 0.03 mGal and in the fracture modeling the gravity vertical component of attraction force is 0.0565 mGal. Based on the results of this modeling, distance curve vs. gravity anomaly response is obtained for both cases. In the intrusion rock model obtained by the profile model with an open type down. While the fracture modeling is obtained anomalous profile curve variation which states that in the fracture area with a significant change in the direction of the curve.
<p class="Abstract">E-commerce applications to sell various products produced by students in higher education can increase income-generating. However, a few universities still use e-commerce to sell student products, especially learning products. This research aims to produce an e-commerce application for web-based learning products in universities. The research method is development research with a research design using the waterfall model. The waterfall model procedure consists of analysis, design, coding, and testing. The system design uses Unified Modeling Language (UML) modeling such as context diagrams, class diagrams, use case diagrams, and activity diagrams. The system's coding uses the PHP programming language, Jquery, and the Boostrap Framework. The testing stage is through black-box analysis carried out by experts in the field of system design, with the results of testing each case being well-integrated and feasible to be applied. The result of the research is a web-based e-commerce application that sells learning products in universities.</p>
Jalan Raya Suban Bandar Lampung is located on the physiography of Bukit Barisan which is influenced by the movement of the Sumatran Fault, causing morphological conditions in the form of hills and steep slopes. This condition triggers the occurrence of disasters, one of which is landslides. In this study, the lithology of subsurface rocks and slides in the landslide-prone zone was examined using the Wenner-Schlumberger and Wenner-Alpha configuration geoelectrics. The Wenner-Schlumberger configuration has deeper penetration but lower resolution subsurface images, while the Wenner-Alpha configuration has less deep penetration but lower resolution surface images. The use of these two configurations is to take advantage of the advantages and reduce the disadvantages of each configuration in landslide analysis. The measurement results in the Wenner-Schlumberger and Wenner-Alpha configurations identified that the upper layer consists of weathered rock associated with clay tuff and sandy tuff with a resistivity of 1 m – 95.6 m, the second layer is clay sand from the Campang Formation with a resistivity value of 95.6 m – 250 m and the third layer is a mixture of breccia and igneous rock from the Tarahan Formation with a resistivity value of more than 250 m. The clay-sand layer was identified as the slip plane in the study area
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.