Optical data links are the backbone of today's telecommunication infrastructure. The integration of electronic and optic components on one chip is one of the most attractive routes to further increase the system performance. Here, we present the fabrication of photodetectors based on CVD-grown graphene on silicon photonic waveguides. The devices operate bias-free in the Cband at 1550 nm and show an extrinsic −3 dB bandwidth of 41 GHz. We demonstrate that these detectors work at data rates up to 50 GBit/ s with excellent signal integrity.
Graphene is considered a promising material for broadband opto-electronics because of its linear and gapless band structure. Its optical conductivity can be significantly tuned electrostatically by shifting the Fermi level. Using mentioned property, we experimentally demonstrate a graphene based electro-absorption modulator with very low insertion loss. The device is realized on a silicon on insulator (SOI) waveguide operating at 1550 nm wavelength. The modulator shows a modulation depth of 16 dB and an insertion loss of 3.3 dB, surpassing GeSi and previous graphene based absorption modulators and being comparable to silicon Mach-Zehnder interferometer based modulators.
Graphene has been considered as a promising material for opto-electronic devices, because of its tunable and wideband optical properties. In this work, we demonstrate electro-refractive phase modulation in graphene at wavelengths from 1530 to 1570 nm. By integrating a gated graphene layer in a silicon-waveguide based Mach-Zehnder interferometer, the key parameters of a phase modulator like change in effective refractive index, insertion loss and absorption change are extracted. These experimentally obtained values are well reproduced by simulations and design guidelines are provided to make graphene devices competitive to contemporary silicon based phase modulators for on-chip applications.
Thermo-optical tuning of the refractive index is one of the pivotal operations performed in integrated silicon photonic circuits for thermal stabilization, compensation of fabrication tolerances, and implementation of photonic operations. Currently, heaters based on metal wires provide the temperature control in the silicon waveguide. The strong interaction of metal and light, however, necessitates a certain gap between the heater and the photonic structure to avoid significant transmission loss. Here we present a graphene heater that overcomes this constraint and enables an energy efficient tuning of the refractive index. We achieve a tuning power as low as 22 mW per free spectral range and fast response time of 3 µs, outperforming metal based waveguide heaters. Simulations support the experimental results and suggest that for graphene heaters the spacing to the silicon can be further reduced yielding the best possible energy efficiency and operation speed.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.