Abstrak Telah dilakukan proses pembuatan dua buah material komposit dengan masing-masing filler berupa abu gosok dan sekam padi, matriks berupa resin. Pada komposit resin – abu gosok, perbandingan volume antara filler dan matriks adalah 1:1, sedangkan pada komposit resin – sekam padi digunakan tiga perbandingan volume antara filler dan matriks, yaitu 1:1, 1:2, dan 2:1. Setelah proses pembuatan selesai, dilakukan pengujian TGA dan pengujian kelenturan tiga titik untuk setiap jenis komposit yang dihasilkan. Pada hasil pengujian TGA, didapatkan bahwa penurunan bobot paling besar yang pada komposit resin – abu gosok terjadi pada temperatur 390,29 ºC, sedangkan pada komposit resin – sekam padi terjadi pada temperatur 399,86 ºC. Hasil pengujian kelenturan tiga titik menunjukkan bahwa modulus elastisitas untuk sampel komposit resin – abu gosok adalah sebesar 4,97 109 N/m2, sedangkan untuk sampel-sampel resin – sekam padi berada pada orde 108 N/m2 dan 106 N/m2. Secara keseluruhan, dapat dikatakan bahwa komposit resin – sekam padi yang dihasilkan memiliki ketahanan temperatur yang lebih baik dan lebih elastis dibandingkan komposit resin – abu gosok. Kata-kata kunci: komposit, resin, abu gosok, sekam padi. Abstract We have done the fabrication of two kinds of composite material the fillers that we used rub ash for one type of composite and the husk of rice for another, the matrix for both is resin. The resin – rub ash composite, the volume ratio of filler and matrix is 1:1, while in the resin – husk of rice composite we used three volume ratios, those are 1:1, 1:2, and 2:1. After the process of fabrication was done, we did TGA test and three points flexural test for every composite we fabricated. The results of TGA test show that the most significant weight decrease of resin – rub ash composite occurred at 390,29 ºC, while the resin – rub ash composite's most considerable weight decrease occurred at 399,86 ºC. The results of three points flexural test show that elasticity of resin – rub ash composite is 4,97 x 109 N/m2, while elasticity modulus of all kinds of the resin – husk of rice composite is in order of 108 N.m2 and 106 N/m2. Overall, we can conclude that the resin – husk of rice composite is more heatproof and more elastic than the resin – rub ash composite. Keywords: composite, resin, rub ash, the husk of rice.
AbstrakTelah dilakukan pencampuran nanopartikel emas dengan kuantum dot CdSe 618. Tujuan dari penelitian ini adalah untuk mengetahui pengaruh penambahan nanopartikel emas terhadap intensitas emisi dan waktu peluruhan fotoluminesensi kuantum dot CdSe 618. Dalam 2 mL kuantum dot CdSe 618, ditambahkan nanopartikel emas sebanyak 40 µL, 80 µL, dan 120 µL. Pada setiap penambahan tersebut, dilakukan pengujian fotoluminesensi dan time-resolved photoluminescence, masing-masing untuk mengetahui intensitas emisi dan waktu peluruhan fotoluminesensi kuantum dot CdSe 618 setelah ditambahkan dengan nanopartikel emas. Dilakukan pula pengukuran terhadap rentang panjang gelombang absorpsi dari nanopartikel emas, beserta ukuran diameter partikel-partikelnya. Hasil pengujian menunjukkan bahwa secara keseluruhan, intensitas emisi kuantum dot CdSe 618 setelah ditambahkan dengan nanopartikel emas menjadi lebih rendah, dan nilai waktu peluruhan fotoluminesensi menjadi lebih besar. Penurunan intensitas emisi dan peningkatan waktu peluruhan fotoluminesensi diakibatkan oleh kemunculan plasmon pada nanopartikel emas. Kata-kata kunci: nanopartikel emas, kuantum dot, fotoluminesensi. AbstractWe have done the mixing of gold nanoparticles and CdSe 618 quantum dots. The purpose of this study is to see the influence of gold nanoparticles increment to emission intensity and photoluminescence decay time of CdSe 618 quantum dots. Into 2 mL of CdSe 618 quantum dots, we added gold nanoparticles as much as 40 µL, 80 µL, and 120 µL. At each adding, we did photoluminescence and time-resolved photoluminescence testings, to see emission intensity and photoluminescence time decay of CdSe 618 quantum dots after the adding of gold nanoparticles. We also did a measurement of absorption wavelength range of gold nanoparticles, along with diameter size of the particles. The results showed that, overall, the emission intensity of CdSe 618 quantum dots became lower after the adding of gold nanoparticles, and the value of photoluminescence decay time became bigger. The decrease of emission intensity and the increment of photoluminescence decay time were caused by the appearance of a plasmon at gold nanoparticles.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.