This research employed machine learning (ML) and SHapley Additive ExPlanations (SHAP) methods to assess the strength and impact of raw ingredients of cement mortar (CM) incorporated with waste glass powder (WGP). The data required for this study were generated using an experimental approach. Two ML methods were employed, i.e., gradient boosting and random forest, for compressive strength (CS) and flexural strength (FS) estimation. The performance of ML approaches was evaluated by comparing the coefficient of determination (R2), statistical checks, k-fold assessment, and analyzing the variation between experimental and estimated strength. The results of the ML-based modeling approaches revealed that the gradient boosting model had a good degree of precision, but the random forest model predicted the strength of the WGP-based CM with a greater degree of precision for CS and FS prediction. The SHAP analysis revealed that fine aggregate was a critical raw material, with a stronger negative link to the strength of the material, whereas WGP and cement had a greater positive effect on the strength of CM. Utilizing such approaches will benefit the building sector by supporting the progress of rapid and inexpensive approaches for identifying material attributes and the impact of raw ingredients.

No abstract

No abstract

Climate change has become trending news due to its serious impacts on Earth. Initiatives are being taken to lessen the impact of climate change and mitigate it. Among the different initiatives, researchers are aiming to find suitable alternatives for cement. This study is a humble effort to effectively utilize industrial- and agricultural-waste-based pozzolanic materials in concrete to make it economical and environmentally friendly. For this purpose, a ternary blend of binders (i.e., cement, fly ash, and rice husk ash) was employed in concrete. Different variables such as the quantity of different binders, fine and coarse aggregates, water, superplasticizer, and the age of the samples were considered to study their influence on the compressive strength of the ternary blended concrete using gene expression programming (GEP) and artificial neural networking (ANN). The performance of these two models was evaluated using R2, RMSE, and a comparison of regression slopes. It was observed that the GEP model with 100 chromosomes, a head size of 10, and five genes resulted in an optimum GEP model, as apparent from its high R2 value of 0.80 and 0.70 in the TR and TS phase, respectively. However, the ANN model performed better than the GEP model, as evident from its higher R2 value of 0.94 and 0.88 in the TR and TS phase, respectively. Similarly, lower values of RMSE and MAE were observed for the ANN model in comparison to the GEP model. The regression slope analysis revealed that the predicted values obtained from the ANN model were in good agreement with the experimental values, as shown by its higher R2 value (0.89) compared with that of the GEP model (R2 = 0.80). Subsequently, parametric analysis of the ANN model revealed that the addition of pozzolanic materials enhanced the compressive strength of the ternary blended concrete samples. Additionally, we observed that the compressive strength of the ternary blended concrete samples increased rapidly within the first 28 days of casting.

This research examined machine learning (ML) techniques for predicting the compressive strength (CS) of self-compacting concrete (SCC). Multilayer perceptron (MLP), bagging regressor (BR), and support vector machine (SVM) were utilized for analysis. A total of 169 data points were retrieved from the various published articles. The data set was based on 11 input parameters, such as cement, limestone, fly ash, ground granulated blast-furnace slag, silica fume, rice husk ash, coarse aggregate, fine aggregate, superplasticizers, water, viscosity modifying admixtures, and one output with compressive strength of SCC. In terms of properly predicting the CS of SCC, the BR technique outperformed both the SVM and MLP models, as determined by the research results. In contrast to SVM and MLP, the coefficient of determination (R2) for the BR model was 0.95, whereas for SVM and MLP, the R2 was 0.90 and 0.86, respectively. In addition, a k-fold cross-validation approach was adopted to check the accuracy of the employed models. The statistical measures mean absolute percent error, mean absolute error, and root mean square error ensure the validity of the model. Using sensitivity analysis, the influence of input factors on the intended CS of SCC was also explored. This analysis reveals that the highest contributing parameter towards the CS of SCC was cement with 16.2%, while rice husk ash contributed the least with 4.25% among all the input variables.

Rebars made of fiber-reinforced plastic (FRP) might be the future reinforcing material, replacing mild steel rebars, which are prone to corrosion. The bond characteristics of FRP rebars differ from those of mild steel rebars due to their different stress-strain behavior than mild steel. As a result, determining the bond strength (BS) qualities of FRP rebars is critical. In this work, BS data for FRP rebars was investigated, utilizing non-linear capabilities of gene expression programming (GEP) on 273 samples. The BS of FRP and concrete was considered a function of bar surface (Bs), bar diameter (db), concrete compressive strength (fc′), concrete-cover-bar-diameter ratio (c/d), and embedment-length-bar-diameter ratio (l/d). The investigation of the variable number of genetic parameters such as number of chromosomes, head size, and number of genes was undertaken such that 11 different models (M1–M11) were created. The results of accuracy evaluation parameters, namely coefficient of determination (R2), mean absolute error (MAE), and root mean square error (RMSE) imply that the M11 model outperforms other created models for the training and testing stages, with values of (0.925, 0.751, 1.08) and (0.9285, 0.802, 1.11), respectively. The values of R2 and error indices showed that there is very close agreement between the experimental and predicted results. 30 number chromosomes, 9 head size, and 5 genes yielded the optimum model. The parametric analysis revealed that db, c/d, and l/d significantly affected the BS. The FRP rebar diameter size is greater than 10 mm, whereas a l/d ratio of more than 12 showed a considerable decrease in BS. In contrast, the rise in c/d ratio revealed second-degree increasing trend of BS.

No abstract

Rice husk ash (RHA) is a significant pollutant produced by agricultural sectors that cause a malignant outcome to the environment. To encourage the re-use of RHA, this work used multi expression programming (MEP) to construct an empirical model for forecasting the compressive nature of concrete made with RHA (CRHA) as a cement substitute. Thus, the compressive strength of CRHA was developed comprising of 192 findings from the broad and trustworthy database obtained from literature review. The most significant characteristics, namely the specimen’s age, the percentage of RHA, the amount of cement, superplasticizer, aggregates, and the amount of water, were used as input for the modeling of CRHA. External validation, sensitivity analysis, statistical checks, and Shapley Additive Explanations (SHAP) analysis were used to evaluate the models’ performance. It was discovered that the most significant factors impacting the compressive strength of CRHA are the age of the concrete sample (AS), the amount of cement (C) and the amount of aggregate (A). The findings of this study have the potential to increase the re-use of RHA in the production of green concrete, hence promoting environmental protection and financial gain.