No abstract

No abstract

did not affect the solid-state electronic environment. However, it increased the surface cocatalyst to catalyst molar ratio (Al : Zr), acted as a spacer, increased catalyst activity, and enhanced chain-transfer reactions. The separately fed MAO cocatalyst shifted the equilibrium between Cation 1 and Cation 2 toward the right. Consequently, more Cation 2 was generated, which acted as the effective and active single-site catalytic species producing monomodal PDI.

No abstract

Polyethylene‐b‐poly(methyl methacrylate) (PE‐b‐PMMA) diblock copolymer has important interfacial applications. Hence, a PE‐b‐isotactic PMMA diblock copolymer was synthesized using SiMe2(Ind)2ZrMe2 and MAO cocatalyst. The polymerization mechanism and the origin of PMMA isotacticity were duly explained. An appropriate nonisothermal Avrami‐Erofeev crystallization model was developed to compare the crystallization kinetics of the above copolymer with that of a PE homopolymer. For both polymers, the model well matched the entire differential scanning calorimeter crystallinity profile, notably for a single Avrami‐Erofeev index, and predicted cylindrical crystal growth. This model particularly overcomes the limitations of the published nonisothermal crystallization models, and provides interesting insight into PE crystallization. The PMMA block significantly decreased the heats of crystallization and fusion, % crystallinity, and the relative crystallization function; increased the nonisothermal crystallization rate constant; and introduced minimal dilution effect whereas the PE block formed a continuous or percolated phase. This study correlates catalyst structure, copolymer block tacticity, and PE nonisothermal crystallization and melting behavior. © 2012 American Institute of Chemical Engineers AIChE J, 59: 200–214, 2013

The authors noticed that Scheme 1i ntheir Full Paper was incorrectly drawn. The correct Scheme 1 is provided below.The authors apologize for the oversight. Scheme 1. Postulated mechanism for cyclohexadecane formation from cyclooctanem etathesis.

Two catalysts, denoted as catalyst 1 [silica/MAO/( n BuCp)2ZrCl2] and catalyst 2 [silica/ n BuSnCl3/MAO/( n BuCp)2ZrCl2] were synthesized and subsequently used to prepare, without separate feeding of methylaluminoxane (MAO), ethylene homopolymer 1 and homopolymer 2, respectively, and ethylene–1-hexene copolymer 1 and copolymer 2, respectively. Gel permeation chromatography (GPC), Crystaf, differential scanning calorimetry (DSC) [conventional and successive self-nucleation and annealing (SSA)], and 13C nuclear magnetic resonance (NMR) polymer characterization results were used, as appropriate, to model the catalyst active-center distribution, ethylene sequence (equilibrium crystal) distribution, and lamellar thickness distribution (both continuous and discrete). Five different types of active centers were predicted in each catalyst, as corroborated by the SSA experiments and complemented by an extended X-ray absorption fine structure (EXAFS) report published in the literature. 13C NMR spectroscopy also supported this active-center multiplicity. Models combined with experiments effectively illustrated how and why the active-center distribution and the variance in the design of the supported MAO anion, having different electronic and steric effects and coordination environments, influence the concerned copolymerization mechanism and polymer properties, including inter- and intrachain compositional heterogeneity and thermal behaviors. Copolymerization occurred according to the first-order Markovian terminal model, producing fairly random copolymers with minor skewedness toward blocky character. For each copolymer, the theoretical most probable ethylene sequences, n E MPDSC‑GT and n E MPNMR‑Flory, as well as the weight-average lamellar thicknesses, L wav DSC–GT and L wav SSA DSC, were found to be comparable. To the best of our knowledge, such a match has not previously been reported. The percentage crystallinities of the homo- and copolymers increased linearly as a function of L MPDSC‑GT. This indicates that the homo- and copolymer chains folded excluding the butyl branch. The results of the present study will contribute to developing future supported metallocene catalysts that will be useful in the synthesis of new grades of ethylene−α-olefin linear low-density polyethylenes (LLDPEs).

A novel conceptual framework that generates insightful new results about crystallization and melting behaviors of i-PP.