Investigations of the tape placement process are still underway to achieve the laminate quality comparable with other highly developed composite manufacturing methods, such as autoclave-based processes. The evaluation of the products and the mechanical properties of the material has revealed regions where some upgrading could bring significant enhancement in performance. This study is concerned with issues related to the characterization of material properties, interlaminar bond development, and ways of optimizing process parameters. These include heating, layup velocity, tool temperature, and consolidation force, which were studied to determine their effects on the mechanical strength of the composites produced. The bonding degree of the laminates was simulated taking into account a combination of process parameters, comparing the predictions with the actual test results. The thermal stability of the polyether ether ketone matrix, in relation to the processing conditions used in the manufacture, and their effects on the interlaminar bonding

The differential intervention effects on hookah and cigarette smokers were seen (a) because the behavioral support intervention was designed primarily for cigarette smokers; (b) because of differences in demographic characteristics, behavioral, and sociocultural determinants; or (c) because of differences in nicotine dependency levels between the 2 groups.

One of the ways to identify the quality of structures made from fibre-reinforced thermoplastic material is by examining its void content percentage. Significant improvement in mechanical properties can be achieved by minimising it. The purpose of this work was to develop a simulation tool from existing available model in literature, to trace out the void development inside the laminate during the manufacturing and identification of major influencing process parameter. The effects of consolidating force, process velocity, hot gas flow in the heating region, and repetitive passes were investigated through simulation. A series of experiments was carried out on several AS4/PEEK laminated plates manufactured by automatic tape placement process. Simulated void distribution through thickness and density were compared with measured values to trace the effecting input parameters. Thickness build-up with successive lay-ups is also monitored online and the average thickness lies in close proximity to the predicted range. Major influencing process parameters were identified.

Thermoplastic tape placement with in situ consolidation is a unique process, in which prepreg tape is precisely positioned, laid-up and immediately consolidated on the tool surface in a single step. This study addresses some of the remaining issues that restrict the industrialisation of the thermoplastic tape placement. The consolidation quality of the laminates depends on several parameters underlying the consolidation mechanism, for example the tape placement setup, the processing parameters, and the material characteristics. In order to identify the critical parameters of the process, simulations were carried out to study the process sensitivity on individual parameters.

In a qualitative study on the stigma associated with tuberculosis (TB), involving 73 interviews and eight focus groups conducted in five sites across three countries (Bangladesh, Nepal, and Pakistan), participants spoke of TB's negative impact on the marriage prospects of women in particular. Combining the approach to discovering grounded theory with a conceptualization of causality based on a realist ontology, we developed a theory to explain the relationships between TB, gender, and marriage. The mechanism at the heart of the theory is TB's disruptiveness to the gendered roles of wife (or daughter-in-law) and mother. It is this disruptiveness that gives legitimacy to the rejection of marriage to a woman with TB. Whether or not this mechanism results in a negative impact of TB on marriage prospects depends on a range of contextual factors, providing opportunities for interventions and policies.

BackgroundPrompt, quality assured laboratory diagnosis is key to effective malaria case management and control, especially since the introduction of the more expensive artemisinin combination therapy (ACT). The malaria programme and its non-government partners, on the basis of WHO recommended Lot Quality Assurance methods, have developed a district level external quality assurance (EQA) system. This study was designed to assess the feasibility, under programme conditions, of an integrated district level external quality assurance and supervision approach for malaria microscopy.Design and MethodsA prospective study conducted over seven months period (May-November 2007). In addition to the standard WHO EQA elements, three operational innovations were introduced, with the a district laboratory supervisor: a) onsite re-checking of slides, b) in ensuring uninterrupted availability of laboratory reagents and supplies at diagnostic centers, and c) supervision of administrative and technical components. The quantitative data for the study came from the service records/documents, whereas the qualitative data came from the key informant interviews.ResultsDuring the seven month period in four districts, a total of 8,118 slides were examined of which 209 (2.6%) were found positive for malaria parasites (slide positivity range between1.6% to 6.0%). The District Laboratory Supervisors in four districts reexamined a total of 1,770 slides (22%). The proportion of slides found discordant ranged from 0.5% to 1%. The quality of smear preparation was found acceptable in 73% slides.ConclusionsA district-based EQA, based on lot quality assurance methods was implemented, using context-specific operational guidelines, tools and training modules, and other inputs from the malaria control programme and partners. This EQA and supervision approach was found to be feasible and acceptable to those involved. Further study is required on the microscopy quality and cost-effectiveness of adding external quality assurance and supervision to district malaria microscopy services.

BackgroundRespiratory diseases, namely asthma and chronic obstructive pulmonary disease (COPD), account for one-fourth of the patients at the primary health-care (PHC) facilities in Pakistan. Standard care practices to manage these diseases are necessary to reduce the morbidity and mortality rate associated with non-communicable diseases in developing countries.ObjectiveTo develop and measure the effectiveness of operational guidelines and implementation materials, with sound scientific evidence, for expanding lung health care, especially asthma and COPD through PHC facilities already strengthened for tuberculosis (TB) care in Pakistan.DesignA cluster randomized controlled trial with two arms (intervention and control), with qualitative and costing study components, is being conducted in 34 clusters; 17 clusters per arm (428 asthma and 306 COPD patients), in three districts in Pakistan from October 2014 to December 2016. The intervention consists of enhanced case management of asthma and COPD patients through strengthening of PHC facilities. The main outcomes to be measured are asthma and COPD control among the registered cases at 6 months. Cluster- and individual-level analyses will be done according to intention to treat. Residual confounding will be addressed by multivariable logistic and linear regression models for asthma and COPD control, respectively. The trial is registered with ISRCTN registry (ISRCTN 17409338).ConclusionsCurrently, only about 20% of the estimated prevalent asthma and COPD cases are being identified and reported through the respective PHC network. Lung health care and prevention has not been effectively integrated into the core PHC package, although a very well-functioning TB program exists at the PHC level. Inclusion of these diseases in the already existent TB program is expected to increase detection rates and care for asthma and COPD.

Background: Tuberculosis (TB) is a major cause of mortality and is affecting millions of people in third world countries. In DOTS patients are monitored facility based and treatment supporter based; by these two ways patients are observed for the treatment. The aim of the study was to explore the role of treatment supporters and their impact on the treatment outcomes.