Industrial milk powder production applies the principle of a spray dryer. In the powdered milk industry using a spray dryer, there are still some problems in actual conditions, such as fouling in the heat exchanger and losses. Losses are lost material or time that results in losses for the company. The importance of finding material losses as soon as possible it is possible to make a solution so that initially unknown material is wasted in vain and can be used as a finished good. Steps taken to resolve the problem of material losses are to identify problems and data by mapping losses according to actual conditions. The main contributor to material losses is in the mixing tank prior to the spray dryer due to foaming phenomena. After that, a CFD simulation of the mixing tank can be performed on Ansys with the aim of the simulation is to get the contour of the foaming phenomenon and find out the height the phenomenon of foaming (foam) with the properties setup begins at the beginning of making geometric designs with the size of the tank is 3.5 m and uses a marine propeller type, then proceeds with meshing In geometry, meshing here uses the automatic meshing method due to the limited analysis students. The solving stage is carried out by inputting data such as density, viscosity, and input multiphase (mixture), and viscous (Large Eddy Simulation), as the boundary conditions of the geometry, after that making a plane from the results of running to form a plane in geometry, then choose the results of the contour volume fraction to find out the phenomena that occur in mixing tank so that conclusions and solutions can be drawn. Based on the results of data analysis and the field in the form of mapping and data on quantity losses, there are still some material losses in the form of wet and dry losses that have not been identified, initially the percentage ratio of material losses is 40.57% to 9%. One of the biggest contributors to material wet losses is mixing tanks which are simulated until it is known that there is a foaming phenomenon. It interferes with the way it works level sensor, which causes less maximum withdrawal of milk liquid by the pump. The best way to reduce losses in the mixing tank is to close the valve mixing tank output when showing 1.8%, or it can be rounded to 2% for the safety pump. The liquid used as a product is 270 liters, equivalent to 113 kg. The company can store 8,505 kg/month of powder if the calculation is carried out.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.