Aloe vera plant offers a sustainable solution for the removal of various pollutants from water. Due to its chemical composition, Aloe vera has been explored as coagulant/flocculant and biosorbent for water treatment. Most of the used materials displayed significant pollutants removals depending on the used preparation methods. AV-based materials have been investigated and successfully used as coagulant/flocculant for water treatment at laboratory scale. Selected AV-based materials could reduce the solids (total suspended solids (TSS), suspended solids (SS), total dissolved solids (TDS), and dissolved solids (DS)), turbidity, chemical oxygen demand (COD), biochemical oxygen demand (BOD), heavy metals, and color, with removal percentages varied depending on the coagulant/flocculant materials and on the wastewater characteristics. In the same context, AV materials can be used as biological flocculant for wastewater sludge treatment, allowing good solid–liquid separation and promoting sludge settling. Moreover, using different methods, AV material-based biosorbents were prepared and successfully used for pollutants (heavy metal dyes and phenol) elimination from water. Related results showed significant pollutant removal efficiency associated with an interesting adsorption capacity comparable to other biosorbents derived from natural products. Interestingly, the enzymatic system of Aloe vera (carboxypeptidase, glutathione peroxidase, and superoxide dismutase) has been exploited to degrade textile dyes. The obtained results showed high promise for removal efficiencies of various kinds of pollutants. However, results varied depending on the methodology used to prepare the Aloe vera based materials. Because of its valuable properties (composition, abundance, ecofriendly and biodegradable), Aloe vera may be useful for water treatment.
Cactus is cultivated in many regions over the world. Because of its chemical composition and its valuable nutritional and biological characteristics, cactus finds applications in different sectors such as the pharmaceutical and the food industries. Interestingly, cactus materials (cladodes, fruit seeds, peel, etc) have been explored for their probable use as adsorbents for the removal of toxic heavy metals and dyes from wastewater. Various preparations methods were used to produce cactus material-based biosorbents. These biosrbents have been investigated and successfully used for the elimination of both heavy metal and dyes from aqueous solutions. Related results showed very promising pollutant removal efficiency associated with an interesting adsorption capacity similar to other materials from various origins. This paper explores various cactus biosorbents preparations. Furthermore, their efficiency in depollution and factors controlling the adsorption capacity will be discussed.
In recent years, steel-concrete composite shear walls have been widely used in enormous high-rise buildings. Due to their high strength and ductility, enhanced stiffness, stable cycle characteristics and large energy absorption, such walls can be adopted in auxiliary buildings, surrounding the reactor containment structure of nuclear power plants to resist lateral forces induced by heavy winds and severe earthquakes. The current study aims to investigate the seismic behaviour of composite shear walls and evaluate their performance in comparison with traditional reinforced concrete (RC) walls when subjected to cyclic loading. A three-dimensional finite element model is developed using ANSYS by emphasising constitutive material modelling and element type to represent the real physical behaviour of complex shear wall structures. The analysis escalates with parametric variation in reinforcement ratio, compressive strength of the concrete wall, layout of shear stud and yield stress of infill steel plate. The modelling details of structural components, contact conditions between steel and concrete, associated boundary conditions and constitutive relationships for the cyclic loading are explained. The findings of this study showed that an up to 3.5% increase in the reinforcement ratio enhanced the ductility and energy absorption with a ratio of 37% and 38%, respectively. Moreover, increasing the concrete strength up to 55 MPa enhanced the ductility and energy absorption with ratios of 51% and 38%, respectively. Thus, this improves the contribution of concrete strength, while increasing the yield stress of steel plate (to 380 MPa) enhanced the ductility (by a ratio of 66%) compared with the reference model. The present numerical research shows that the compressive strength of the concrete wall, reinforcement ratio, layout of shear stud and yield stress of infill steel plate significantly affect ductility and energy absorption. Moreover, this offers a possibility for improving the shear wall’s capacity, which is more important.
This study aims to evaluate the hydro-chemical characteristics of Ouargla, Algeria basin groundwaters harvested from the Mio Pliocene aquifer. The study covered 70 samples; the physical parameters, potential of hydrogen (pH), and electrical conductivity EC μS.cm−1 were determined in situ, using a multiparameter; the laboratory analysis included dry residuals DR (mg/L), calcium Ca2+ (mg/L), magnesium Mg2+ (mg/L), sodium Na+ (mg/L), potassium K+ (mg/L), bicarbonates HCO3− (mg/L), sulfates SO42− (mg/L), and chloride Cl− (mg/L). The piper diagram shows that the Ouargla basin ground waters divided into two facies, sodic chlorinated in 93% and sodic sulphated in 7% of samples. The United States Salinity Laboratory Staff (USSL) diagram was used to detect the suitability of groundwater in irrigation where the results show that the groundwater was classed into two classes, poor water (C4 S4) and bad water (C4 S4). Furthermore, indices such as the Kelly index (KI), sodium adsorption ratio (SAR), sodium solubility percentage (Na%), and magnesium hazards (MH) confirm the negative effect of groundwater on soil permeability in 96%, 80%, 89%, and 53% of samples. The permeability index (PI) shows that the analyzed samples were considered as doubtful (71%) and safe (29%), otherwise there is no risk related to residual sodium carbonate (RSC). The geo-spatial distribution of deferent indices shows that all the study area has poor groundwater for irrigation, except the south-west part, where the groundwaters of this sub-area do not form a problem related to RSC.
Gaseous pollutants such as hydrogen gas (H2) are emitted in daily human activities. They have been massively studied owing to their high explosivity and widespread usage in many domains. The current research is designed to analyse optical fiber-based H2 gas sensors by incorporating palladium/graphene oxide (Pd/GO) nanocomposite coating as sensing layers. The fabricated multimode silica fiber (MMF) sensors were used as a transducing platform. The tapering process is essential to improve the sensitivity to the environment through the interaction of the evanescent field over the area of the tapered surface area. Several characterization methods including FESEM, EDX, AFM, and XRD were adopted to examine the structure properties of the materials and achieve more understandable facts about their functional performance of the optical sensor. Characterisation results demonstrated structures with a higher surface for analyte gas reaction to the optical sensor performance. Results indicated an observed increment in the Pd/GO nanocomposite-based sensor responses subjected to the H2 concentrations increased from 0.125% to 2.00%. The achieved sensitivities were 33.22/vol% with a response time of 48 s and recovery time of 7 min. The developed optical fiber sensors achieved excellent selectivity and stability toward H2 gas upon exposure to other gases such as ammonia and methane.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.