This paper presents a method to optimize the placement of capacitors in a distribution system to correct power factor and reduce losses and costs. The method uses the Teaching Learning Based Optimization (TLBO) method to solve the optimal capacitor placement problem. The combinatorial nature of the problem suggests the employment of a mixed binary and real valued TLBO algorithm. To validate the efficiency of the method, it was applied to various examples (different bus systems) and simulation results are discussed.
Pump and pull cementing method is introduced to overcome soft cement plugs due to the swabbing effect and contamination in an oil-based mud environment. The method aims to address quality concerns in challenging well profiles where conventional cementing techniques are deemed to fail, which potentially lead to additional cost for remedial cementing work and non-productive rig time. The method is utilized to tackle a re-occurring issue of tagging soft cement plugs that are used for several applications, including plugging and abandonment and sidetracking operations, in deep highly deviated or horizontal wells. In such profiles, fluids and cement don't balance themselves as gravity is not the predominant factor. Subsequently, the cement plug cannot be balanced, and contamination takes place resulting in its failure. The method targets minimizing this by reducing the effect of pulling out of the plug by keeping the drill pipe stinger inside the cement slurry and replacing the volume created while pulling out of the hole by pumping cement until completing the placement of the plug. The technique is time sensitive since most of the cement slurry remains in drillpipe while preforming the job. For that reason, intensive planning is required to ensure successful implementation. One factor that impact the quality of the job is the abundance of actual downhole data, including caliper and temperature logs. Based on that, cement slurry design can be adjusted to account for temperature effect as well as adjusting volume calculations. Also, lab and computer simulations play a significant role in determining several parameters such as spacer formulation, mud removal efficiency, ultimate compressive strength chart, and additives concentrations, especially retarders. In terms of field preparedness, specific equipment and competencies are required for such critical jobs. The method was deployed successfully in several jobs, resulting in excellent cement quality. At the top of that, the method was used to optimize operations by pumping a single long cement plug instead of several balanced cement plugs. This has directly resulted in saving several rig days while delivering satisfactory cement hardness. A couple of case studies are introduced to showcase the effectiveness of the method in challenging applications. Pump and pull technique proved that it resolves the challenge of placing cement plugs in highly deviated and horizontal wells. It earns more importance as wells are growing in complexity. Recently, the technique was used to successfully place significantly longer cement plugs, achieving an outstanding level of operational efficiency by saving rig days and resulting in cost optimization of cementing operations by reducing the number of required plugs to be pumped.
This paper addresses some challenges concerning cement slurry designs, focused on thickening time, requiring careful engineering practices, and proper cementing operational considerations. It presents a series of thickening time test studies compared to "conventional testing practice" versus "field simulated testing" to illustrate the differences between results. Many aspects of oilfield cementing are sufficiently important to warrant study. One area that requires attention is the procedures used to design the cement slurry in the well. The batch-mix and static conditions influence the physical attributes of oilfield cement, including thickening time. Conventional laboratory testing invariably follows the API procedure for thickening time. Although this might be adequate in most cases, it may only precisely predict field behavior (at actual conditions) in some cases. Conventional thickening time tests may not necessarily indicate the true responsiveness of cement slurry. Traditional thickening time waiting periods do not relate directly to how long a slurry can remain static and still be moveable after an inadvertent or intentional shutdown during placement. Mixing, pumping, and displacing the cement (including any shutdown) affect the hydration and thickening behavior. Therefore, it is imperative to understand the relative contributions from each part of the process toward the thickening time to help prevent failures. These contributions might not significantly impact slurry properties but should be quantified and understood. The reliable prediction of cement thickening time can be vital to the success of oilfield cementing operations. Because cement placement techniques have become complex, delivering slurry with accurate thickening time can be crucial to the job's success. This paper presents a modified testing protocol to evaluate the effects of batch-mixing and static-period on cement slurry's thickening time to minimize the incidents related to the premature setting of cement slurry.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.