Multilayers of gold nanoclusters (GNCs) coated with a thin Pd layer were constructed using GNCs modified with self-assembled monolayers (SAMs) of mercaptoundecanoic acid and a polyallylamine hydrochloride (PAH) multilayer assembly, which has been reported to act as a three-dimensional electrode. SAMs were removed from GNCs by electrochemical anodic decomposition and then a small amount of Pd was electrochemically deposited on the GNCs. The kinetics of the oxygen reduction reaction (ORR) on the Pd modified GNC/PAH multilayer assembly was studied using a rotating disk electrode, and a significant increase in the ORR rate was observed after Pd deposition. Electrocatalytic activities in alkaline and acidic solutions were compared both for the GNC multilayer electrode and Pd modified GNC electrode.

Size and lattice constant of thiol self-assembled monolayer (SAM)-modified gold nanoclusters (GNCs) assembled on Au(111) surfaces after each electrochemical treatment were investigated using grazing incidence x-ray diffraction (GIXRD). When the potential was swept between 0 and 1.3 V (vs.Ag/AgCl), the size and lattice constant of GNCs slightly decreased due to the oxidative desorption of the SAMs. As the number of potential cycles increased, the size of GNCs started to increase due to the aggregation, while the lattice constant continued to decrease due to further desorption of the SAMs from the GNCs. After most of the SAMs were removed from the GNCs, the size and lattice constant monotonically increased with the number of potential cycles. The size dependent lattice constant change was observed when GNCs were smaller than ~35Å.

An understanding of electrolyte stratification behaviors in lead-acid battery electrolytes during battery operation is important for optimal operation and design of lead-acid batteries for vehicle applications. In this paper, we...

-We studied the light extraction efficiencies of white organic light-emitting diodes with a light-out-coupling layer by simulations and experiments. The light extraction efficiencies estimated by the simulation were confirmed to agree well with those measured by the experiments. Moreover, we successfully obtained the high light extraction efficiency (η OC ) of 69%.