Experimental and numerical studies on the acoustically induced fluid flow at the center of pseudo-standing surface acoustic waves, as typically employed in Lab-on-a-Chip devices for particle separation.
A two-dimensional numerical model for self-propagating reactions in Al/Ni multilayer foils was developed. It was used to study thermal properties, convective heat loss, and the effect of initial temperature on the self-propagating reaction in Al/Ni multilayer foils. For model adjustments by experimental results, these Al/Ni multilayer foils were fabricated by the magnetron sputtering technique with a 1:1 atomic ratio. Heat of reaction of the fabricated foils was determined employing Differential Scanning Calorimetry (DSC). Self-propagating reaction was initiated by an electrical spark on the surface of the foils. The movement of the reaction front was recorded with a high-speed camera. Activation energy is fitted with these velocity data from the high-speed camera to adjust the numerical model. Calculated reaction front temperature of the self-propagating reaction was compared with the temperature obtained by time-resolved pyrometer measurements. X-ray diffraction results confirmed that all reactants reacted and formed a B2 NiAl phase. Finally, it is predicted that (1) increasing thermal conductivity of the final product increases the reaction front velocity; (2) effect of heat convection losses on reaction characteristics is insignificant, e.g., the foils can maintain their characteristics in water; and (3) with increasing initial temperature of the foils, the reaction front velocity and the reaction temperature increased.
Reactive aluminum–nickel multilayer system shows exothermic energetic materials which act as a heat source for packaging and bonding of microsystems. The main challenge is controlling the self-propagation reaction velocity and temperature generated by thermal management through different thermal conductive substrate materials. The current work investigates the heat distribution of Al/Ni multilayer foils from different thermal conductive substrates which act as heat sink materials during the self-propagating reaction. A two-dimensional numerical model was developed to study thermal conductive heat loss and substrate thermal properties on the self-propagating reaction in Al/Ni multilayer foils. The self-propagating reaction was introduced on the surface of the foils by an electrical spark. Here we investigate the minimum critical thickness of Al/Ni multilayer foils which shows the self-propagation reaction on different substrates and verified from the two-dimensional numerical model. The outcomes of this investigation will facilitate the integration of Al/Ni multilayer foils on different substrates as intrinsic heat sources for different applications of micro/nanodevices.
Graphical abstract
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.