This study evaluated the mechanical strength correlated to the percentage of the total volume of weld and porosities of Co-Cr alloy joints welded with TIG technique. Thirty specimens were perpendicularly sectioned to the long-axis and rejoined by using X30-shaped joint design with TIG welding. They were divided into 3 groups (n=10): the CG1 with a 60-A depth and 90-ms pulse; the CG2 with a 60-A depth and 120-ms pulse and the CG3 with a 60-A depth and 160-ms pulse. The specimens were submitted to nondestructive tests: radiographic inspection, penetrant liquid and Micro- CT (to calculate the percentage of the total volume of welding and the porosities) and then tested with 3-point bending. The fracture surfaces were analyzed with scanning electron microscopy (SEM). The data were statistically analyzed with 1-way ANOVA and the Tukey post hoc test for all the variables which were analyzed: flexural strength, total volume of weld and porosities. Pearson correlation test was also applied (ɑ=.05). The 1-way ANOVA showed that the factors machine parameters were not significant for flexural strength values (P=.231), the total volume of weld (P=.057) and porosities (P=.057). There are no significant relationships between any pair of variables after Pearson correlation test (P >.050). This, suggesting that the three machine regulation can be an option for joining prefabricated Co-Cr rods in this kind of union.
A reabilitação oral de um paciente desdentado total requer atenção para sua correta avaliação, criterioso planejamento e realização adequada desse planejamento. O presente trabalho relata caso de substituição de sistema de retenção barra-clipe pelo sistema Equator de uma overdenture inferior. Paciente do sexo feminino, 70 anos de idade, compareceu ao projeto de extensão “Overdenture para desdentados totais na geriatria”, queixando-se de um volume lingual grande da sua prótese inferior, dificultando sua alimentação e fonética e de fraturas sucessivas dessa prótese. O exame clínico intraoral revelou a presença de prótese total superior e overdenture inferior com o sistema de retenção barra-clipe, em que a posição espacial da barra estava inadequada e invadia o espaço da língua. Foi planejado a confecção de novas próteses e a substituição do sistema de retenção barra-clipe por um sistema independente. Ao levar o modelo de gesso inferior no delineador foi possível verificar que havia discrepância da inclinação dos implantes maior que 14º, selecionando-se assim o sistema Equator, o qual permite a captura de implantes com até 30º de discrepância. Este caso evidencia a necessidade de um planejamento reverso para a realização das cirurgias de implantes, de forma que um correto sistema de retenção seja escolhido ainda durante planejamento e a etapa cirúrgica seja executada de maneira a atender esse planejamento. Após a colocação das novas próteses e do novo sistema de retenção a paciente relatou melhora significativa na alimentação e fonética, bem como da estética das próteses, gerando bem estar físico, psíquico e social.
There is limited information in literature regarding the accomplishment of Ti-6Al-4V TIG joints welded in prefabricated bars applied to dentistry. Evaluate the ultimate tensile strength and Vickers hardness of Ti-6Al-4V alloy subjected to TIG (Tungsten Inert Gas) welding technique in different diameters. Material and methods: Forty-five specimens were prepared and divided into 5 groups: control group (CG) (n=5), with intact bars in a diameter of 3.0mm, and groups TIG2.5, TIG3, TIG4, TIG5 (n=10) with diameters of 2.5, 3, 4 and 5 mm respectively, welded with TIG in a pulse of 10(ms) and in a depth of 3(A). The specimens were tested by both radiographic inspection and penetrating liquids. After that, they were tested by ultimate tensile strength (UTS) and the elongation percentage (EP) was obtained. Images from fractured samples were taken and the welded areas percentage (WAP) was calculated. Random images were also taken by scanning electron microscope (SEM). Vickers hardness was obtained for base metal (BM), Heat affected zone (HAZ) and Welded zone (WZ). Finite element models were constructed. One-way Anova, Dunnet and Tukey tests (α=.05) were used for statistical analysis of UTS, WAP and EP for different groups and for differences in regions (BM, HAZ and WZ). Finite element models were developed in a workbench environment with boundary conditions simulating a tensile test. The majority of the specimens showed internal voids on radiographic inspection, but porosities or groves were not observed on their surface on penetrant liquid test. Most of the samples fractured in the welded area. The 1-way ANOVA showed significant differences among the groups for UTS, WAP and EP values (P<.001). The Dunnett test showed that TIG3, TIG4 and TIG5 groups had lower UTS values than those of the CG, but TIG2.5 group had no statistical difference in relation to CG. The 1-way ANOVA showed significant differences among the regions (P<.001) for Vickers hardness. Under the experimental conditions described, the diameter of 2.5 seems to be the best option for joining prefabricated rods in this kind of union and in this regulation of the machine.
O endentulismo é um problema de saúde no Brasil, pois afeta o paciente gerando problemas psíquicos, sociais e funcionais. Os tratamentos com próteses sobre implantes devem ser muito bem planejados e executados, para ter uma adequada manutenção e longevidade. Desse modo o presente trabalho relata caso clínico de substituição de uma prótese do tipo protocolo de Branemark inferior por uma overdenture, considerando os princípios biopsicossociais do paciente. Paciente do sexo feminino, 92 anos de idade, compareceu projeto de extensão Overdenture para desdentados totais na geriatria na Escola Técnica de Saúde (ESTES-UFU), queixando-se de halitose, dificuldade de higienização do protocolo e desconforto geral com as próteses. O exame clínico intraoral revelou a presença de uma prótese mucosoportada superior e uma prótese fixa do tipo protocolo inferior, a qual apresentava uma inadequada estabilidade oclusal, alto grau de desgaste dos dentes de resina e presença de biofilme, revelando uma inabilidade da paciente de realizar a correta higienização, visto a perda de coordenação motora dada pela idade da paciente. O plano de tratamento foi definido pela adequação do meio bucal, orientação de escovação e posteriormente a confecção de duas próteses novas. Foram confeccionadas uma prótese convencional superior e uma prótese overdenture inferior sobre pilares Equator, aproveitando os 4 implantes em adequada posição. Após a instalação das próteses, foi possível diagnosticar um maior conforto mastigatório e uma melhora na higienização. Assim, conseguiu-se promover qualidade e longevidade no tratamento de acordo com a necessidade e idade da paciente, devolvendo a saúde oral e a autoestima.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.