The present study analyzes the influence that market conditions have on determining optimum molten salt solar tower plants with storage that maximizes profits (in terms of plant configuration, sizing, and operation) for a location in South Africa. Three different scenarios based on incentive programs and local wholesale electricity prices are considered. A multi-objective optimization modeling approach was followed, showing the tradeoff curves between minimizing investment and maximizing profits when varying critical size-related parameters (such as nameplate capacity, solar multiple (SM), and storage capacity) together with power-cycle design and operating specifications including dynamic startup curves and different storage dispatchability strategies. Results are shown by means of a comparative analysis between optimal plants found for each scenario, highlighting the value that storage has under the current two-tier tariff scheme and the relevance of designing a suitable policy for technology development. Finally, a final analysis is performed with regard to the indicators used for economic evaluation of power plants, by comparing the differences between optimum designs found when using the levelized cost of electricity (LCoE) solely as performance indicator instead of cash-flows and profit-based indicators, such as the internal rate of return (IRR).

No abstract

No abstract

No abstract

No abstract

Solar steam turbines are subject to high thermal stresses as a result of temperature gra dients during transient operation, which occurs more frequently due to the variability of the solar resource. In order to increase the flexibility of the turbines while preserving lift ing requirements, several operational modifications for maintaining turbine temperatures during offline periods are proposed and investigated. The modifications were imple mented in a dynamic thermal turbine model and the potential improvements were quanti fied. The modifications studied included: increasing the gland steam pressure injected to the end-seals, increasing the back pressure and increasing the barring speed. These last two take advantage of the ventilation and friction work. The effects of the modifications were studied both individually as well as in different combinations. The temperatures obtained when applying the combined modifications were compared to regular turbine cool-down (CD) temperatures and showed significant improvements on the startup times of the turbine.

No abstract

No abstract