No abstract

This article presents application of polymer inclusion membranes (PIM) containing polymer matrices: cellulose triacetate (CTA) or poly(vinyl) chloride (PVC), o-nitrophenyloctyl ether (NPOE) as a plasticizer and phosphonium ionic liquids, i.e., trihexyltetradecylphosphonium chloride (Cyphos IL 101), bis(2,4,4-trimethylpentyl)phosphinate (Cyphos IL 104) and tributyltetradecylphosphonium chloride (Cyphos IL 167), as carriers for Zn(II) transport from chloride medium. Cyphos IL167 application as an ion carrier in PIMs is reported for the first time. The membrane composition is found to affect Zn(II) transport significantly. SEM and AFM images show the differences in the surface morphology of PVC and CTA based membranes. Better transport abilities of CTA membranes (Zn(II) recovery factors exceed 80%) compared with those of PVC, indicate that the structural differences between the two polymers play a crucial role for the membrane permeability. The best initial flux and permeability coefficient are obtained for the membranes with Cyphos IL 101 and Cyphos IL 104 as carriers.

Phosphonium ionic liquids (IL), i.e., trihexyl­(tetradecyl)­phosphonium chloride (Cyphos IL 101), trihexyl­(tetradecyl)­phosphonium bis­(2,4,4-trimethylpentyl)­phosphinate (Cyphos IL 104), and tributyl­(tetradecyl)­phosphonium chloride (Cyphos IL 167), were used as ion carriers in CTA or PVC-based polymer inclusion membranes (PIM). Up to now, the morphology and structure of PIMs with phosphonium ILs have not been characterized in detail. Thus, the following techniques were proposed in this papercontact angle measurements, FT-IR, XRD, DSC, AFM, and SEMto analyze the influence of PIM morphology on the efficiency of Zn­(II) transport. CTA-based membranes appeared to be more hydrophilic, with a more expanded and rough surface that allowed better accessibility of the metal ions to the membrane. PVC-based PIMs were more hydrophobic and completely amorphous, and their surface showed less diversity, resulting in worse accessibility. Also, PIM stability after five cycles of transport processes was examined.

The aim of this work is to investigate extraction of ruthenium(III) from acidic aqueous solutions with phosphonium ionic liquids such as trihexyl(tetradecyl)phosphonium chloride (Cyphos IL 101), trihexyl(tetradecyl)phosphonium bis(2,4,4-trimethylpentyl)phosphinate (Cyphos IL 104) and tributyl(tetradecyl)phosphonium chloride (Cyphos IL 167) as extractants. The influence of HCl content in the feed solutions on extraction of Ru(III) was investigated. The research was performed for model solutions containing Ru(III) and a mixture of waste solutions containing Ru(III) and Rh(III). In addition, investigation of the type of extractant and its concentration in the organic phase on extraction of Ru(III) was carried out. Co-extraction of protons to the organic phase was determined. To the best of our knowledge, the extraction of Ru(III) with Cyphos IL 167 (tributyl(tetradecyl)phosphonium chloride) as an extractant has not yet been described in the scientific literature.

In this work transport of Zn(II), Fe(II) and Fe(III) ions from chloride aqueous solutions across polymer inclusion membranes (PIMs) and supported liquid membranes (SLMs) containing one of three phosphonium ionic liquids: trihexyl(tetradecyl)phosphonium chloride (Cyphos IL 101), trihexyl(tetradecyl)phosphonium bis (2,4,4-trimethylpentyl)