Recebido em 18/5/04; aceito em 13/12/04; publicado na web em 13/4/05 CO 2 SEPARATION BY THE PRESSURE SWING ADSORPTION TECHNIQUE. This paper describes the separation of CO 2 from a gas mixture containing 25% CO 2 , 4% O 2 and 71% N 2 using the pressure swing adsorption (PSA) technique. The adsorbent selected was the zeolite 13X due to its great adsorption capacity for CO 2 and selectivity towards the other components of the gas mixture. The experimental technique was designed to identify the most important variables for the process and to optimize it. It is shown that the PSA technique can be used to separate CO 2 from O 2 and N 2 to obtain an effluent containing 2% CO 2 with 99% separation efficiency.
ResumoAs soldas dissimilares (dissimilar metal welds -DMWs) são utilizadas em diversos segmentos da indústria. No caso específico de usinas nucleares, tais soldas são necessárias para conectar tubulações de aço inoxidável com componentes fabricados em aços baixa liga. Os materiais de adição mais utilizados neste tipo de solda são as ligas de níquel 82 e 182. Este trabalho consistiu na soldagem de uma junta dissimilar de aço baixa liga ASTM A-508 G3 e aço inoxidável austenítico AISI 316L utilizando as ligas de níquel 82 e 182 como metais de adição. A soldagem foi realizada manualmente empregando os processos de soldagem ao arco SMAW (Shielded Metal Arc Welding) e GTAW (Gas Tungsten Arc Welding). Os corpos de prova foram caracterizados microestruturalmente utilizando-se microscópio óptico e microscópio eletrônico de varredura com microanálise por dispersão de energia de raios X (EDS) e ensaios de microdureza Vickers. Observou-se uma microestrutura constituída de dendritas de austenita com a presença de precipitados com formas e dimensões definidas pelo aporte térmico e pela direção de soldagem. Não houve variação significativa da dureza ao longo da junta soldada, demonstrando a adequação dos parâmetros de soldagem utilizados.
Palavras-chave: Aço baixa liga. Aço inoxidável austenítico. Soldas dissimilares. Ligas de níquel. Caracterização microestrutural.
AbstractThe dissimilar metal welds (DMWs) are used in several areas of the industries. In the nuclear power plant, this weld using nickel alloy welding wires is used to connect stainless steel pipes to low alloy steel components on the reactor pressured vessels. The filler materials commonly used in this type of weld are nickel alloys 82 and 182.. In this study, dissimilar metal welds composed of low alloy steel ASTM A-508 G3, nickel alloys 82 e 182 as weld metals, and austenitic stainless steel AISI 316L were prepared by manual shielded metal arc welding (SMAW) and gas tungsten arc welding techniques (GTAW). Samples were microstructural characterized by optical microscopy and scanning electron microscopy using energy dispersive X ray microanalysis (EDS). It was noticed that there was a microstructure consisting of austenite dendrites with the presence of precipitates with shapes and dimensions set by the thermal contribution and direction of welding. There was no significant variation of hardness along the weld joint, demonstrating the suitability of the welding parameters used.
Resumo
Aços carbono de baixa liga e aços inoxidáveis são amplamente utilizados nos circuitos primários de reatores nucleares do tipo PWR (Pressurized Water Reactor
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.