No abstract

No abstract

The weathering performance of rice husk-filled high-density polyethylene (RHPE) and natural wood was investigated in this study. The injection molded RHPE, in column end-cap (CECap) shapes, was exposed to both natural and accelerated weathering attacks. The durability of RHPE was compared to Kempas wood (Koompassia malaccensis) and neat polyethylene. Wood underwent the greatest losses in properties among the specimens. Four months of outdoor weathering turned the color of RHPE CECap into silvery grey. When the exposure time increased, the color of RHPE composite faded faster than neat polyethylene. The wood surface darkened and RHPE surface flaked off after being exposed to accelerated weathering conditions. Prolonged weathering exposure caused loss of impact strength of the RHPE composites. In general, RHPE is more resistible to weathering attacks as compared to Kempas wood.

No abstract

This article focuses on the design and investigation of a pair of unequally sized wireless electricity (Witricity) devices that are equipped with integrated planar coil strips. The proposed pair of devices consists of two different square-shaped resonator sizes of 120 mm × 120 mm and 80 mm × 80 mm, acting as a transmitter and receiver, respectively. The devices are designed, simulated and optimized using the CST Microwave Studio software prior to being fabricated and verified using a vector network analyzer (VNA). The surface current results of the coupled devices indicate a good current density at 10 mm to 30 mm distance range. This good current density demonstrates that the coupled devices' surface has more electric current per unit area, which leads to a good performance up to 30 mm range. Hence, the results also reveal good coupling efficiency between the coupled devices, which is approximately 54.5 % at up to a 30 mm distance, with both devices axially aligned. In addition, a coupling efficiency of 50 % is achieved when a maximum lateral misalignment (LM) of 10 mm, and a varied angular misalignment (AM) from 0° to 40° are implemented to the proposed device.