for copying beyond that permitted by Sections 107 or 108 of the U.S. Copyright Law. This consent does not extend to other kinds of copying such as copying for general distribution, for advertising or promotional purposes, for creating new collective works, or for resale. SAE routinely stocks printed papers for a period of three years following date of publication. Direct your orders to SAE Customer Sales and Satisfaction Department. Quantity reprint rates can be obtained from the Customer Sales and Satisfaction Department. To request permission to reprint a technical paper or permission to use copyrighted SAE publications in other works, contact the SAE Publications Group. No part of this publication may be reproduced in any form, in an electronic retrieval system or otherwise, without the prior written permission of the publisher.

International audienceThe present work deals with the measurement and performance of a gamma Stirling engine of 500?W of mechanical shaft power and 600?rpm of maximal revolutions per minute. Series of measurements concerning the pressure distribution, temperature evolution, and brake power were performed. The study of the different functioning parameters such as initial charge pressure, engine velocity, cooling water flowrate, and temperature gradient (between the sources of heat) has been analyzed. The engine brake power increases with the initial charge pressure, with the cooling water flow, and with the engine revolutions per minute. The working fluid temperature measurements have been recorded in different locations symmetrically along both regenerator sides. The recorded temperature in regenerator side one is about 252 degrees C and about 174 degrees C in the opposite side (side two). It shows an asymmetric temperature distribution in the Stirling engine regenerator; consequently, heat transfer inside this porous medium is deteriorated. Copyright (C) 2011 John Wiley & Sons, Ltd

No abstract

No abstract