This work demonstrates the controlled motion and stopping of individual ferrofluid droplets due to a surface tension gradient and a uniform magnetic field. The surface tension gradients are created by patterning hydrophilic aluminum regions, shaped as wedges, on a hydrophobic copper surface. This pattern facilitates the spontaneous motion of water-based ferrofluid droplets down the length of the wedge toward the more hydrophilic aluminum end due to a net capillarity force created by the underlying surface wettability gradient. We observed that applying a magnetic field parallel to the surface tension gradient direction has little or no effect on the droplet's motion, while a moderate perpendicular magnetic field can stop the motion altogether effectively "pinning" the droplet. In the absence of the surface tension gradient, droplets elongate in the presence of a parallel field but do not travel. This control of the motion of individual droplets might lend itself to some biomedical and lab-on-a-chip applications. The directional dependence of the magnetoviscosity observed in this work is believed to be the consequence of the formation of nanoparticle chains in the fluid due to the existence of a minority of relatively larger magnetic particles.

A nanohybrid piezoelectric strain sensor was fabricated by growing vertically aligned (0001)oriented crystalline zinc oxide nanowires directly on graphene (ZnO-VANWs/Gr) using a facile seedless hydrothermal process. Under mechanical strains, the induced piezoelectric effect on the ZnO-VANWs transduces to a piezoelectric gating effect at the ZnO-VANWs/Gr interface, resulting in a modulation of the conductivity of the Gr channel through electrostatic doping. The vertical alignment of the (0001)-oriented ZnO-VANWs on Gr is ideal to achieving high strain sensitivity, and a low-defect ZnO-VANWs/Gr interface obtained in the seedless hydrothermal process is key to realizing high sensitivity and fast response. Indeed, a high sensitivity up to 3.15 × 10 −2 kPa −1 was obtained on the ZnO-VANWs/Gr strain sensors at lower pressures of 1.1 × 10 −6 −11 Torr, together with a fast response time of ∼0.10 s. In particular, these results represent enhancement factors of ∼7 and 8, respectively, as compared to strain sensors of a similar structure, except having a polycrystalline ZnO seed layer on Gr for the growth of ZnO-VANWs. Therefore, our result illustrates the critical importance of the low-defect interface of the ZnO-VANWs with Gr formed in the seedless ZnO-VANW growth for realizing an optimal electrostatic gating of Gr. In addition, the ZnO-VANWs/Gr nanohybrids can be readily scaled up using the seedless hydrothermal process for commercial applications in optoelectronics and sensors.

This paper explores the fluid property commonly called surface tension, its effect on droplet shape and contact angle, and the major influences of contact angle behaviour (i.e. surface roughness and surface chemistry). Images of water droplets placed on treated copper surfaces are used to measure the contact angles between the droplets and the surface. The surface wettability is manipulated either by growing a self-assembled monolayer on the surface to make it hydrophobic or by changing the surface roughness. The main activities in this experiment, then, are (1) preparing and studying surfaces with different surface wettability and roughness; (2) determining the shape and contact angles of water droplets on these surfaces; and (3) demonstrating the spontaneous motion of water droplets using surface tension gradients.

No abstract

A fully flexible strain sensor consisting of vertically aligned ZnO nanowires on graphene transferred on polyethylene terephthalate with prefabricated Au/Ti electrodes (ZnO-VANWs/Gr)/PET) has been obtained. The ZnO-VANWs were grown in solution using a seedless hydrothermal process and are single-crystalline of (0001) orientation that provides optimal piezoelectric gating on graphene when deformed mechanically. The change of the graphene channel conductance under such a piezoelectric gating through transduction of the mechanical deformation on the ZnO-VANWs/Gr was used to detect the strain induced by the deformation. Under applied normal forces of 0.30, 0.50, and 0.70 N in a dynamic manner, the ZnO-VANWs/Gr/PET strain sensors exhibited a high response and response times of ∼0.20 s to both force on and off were achieved. Under mechanical bending curvatures of 0.18, 0.23, 0.37, and 0.45 cm –1 , high sensitivity of the gauge factors up to ∼248 and response times of 0.20 s/0.20 s (rise/fall) were achieved on the ZnO-VANWs/Gr/PET strain sensors. Moreover, the response changes polarity when the directions of bending alters between up and down, corresponding to the polarity change of the space charge on the ZnO-VANWs/Gr interface as a consequence of the compressive and tensile strains along the ZnO-VANWs. This result shows that the low-cost and scalable ZnO-VANWs/Gr/PET strain sensors are promising for applications in stress/strain monitoring, wearable electronics, and touch screens.