No abstract

Density functional theory (DFT) calculations have been used to obtain thermochemical parameters for formation of polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/PCDF) from the oxidation of 2-chlorophenol. Formation mechanisms of PCDD through radical-radical coupling have been investigated in detail. The sequence of 2-chlorophenoxy radical coupling has been studied. The formation of chlorinated bis keto dimers which results from cross coupling of 2-chlorophenoxy at the ortho carbon bearing hydrogen (a known direct route for PCDF formation) passes through a tight transition structure whose barrier is 9.4 kcal/mol (0 K). Three routes for the formation of the most abundant PCDD/PCDF species (viz., 4,6-dichlorodibenzofuran, 4,6-DCDF, and 1-monochlorodibenzo-p-dioxin, 1-MCDD) in oxidation and pyrolysis of 2-chlorophenol are discussed. In the case of 4,6-DCDF, formation through H or HO + keto-keto <==> H2 or H2O + keto-keto* <==> H2 or H2O + enol-keto* <==> H2 or H2O + 4,6-DCDF + HO is shown to be the preferred route. The other two routes proceed via closed shell processes (keto-keto <==> enol-keto <==> enol-enol <==> H2O + 4,6-DCDF) and (keto-keto <==> enol-keto <==> (H-,OH-) 4,6-DCDF <==> H2O + 4,6-DCDF). Results indicate that 1-MCDD should be the favored product in 2-chlorophenol pyrolysis in agreement with experimental findings. According to our results, tautomerization (inter-ring hydrogen transfer) and intra-annular displacement of HCl would not be competitive with paths deriving from H abstraction from the phenolic oxygen and the benzene ring followed by displacement of Cl in the formation of dibenzo-p-dioxin (DD) and 1-MCDD. The results presented here will assist in construction of detailed kinetic models to account for the formation of PCDD/PCDF from chlorophenols.

This study develops the reaction pathway map for the unimolecular decomposition of catechol, a model compound for various structural entities present in biomass, coal, and wood. Reaction rate constants at the high-pressure limit are calculated for the various possible initiation channels. It is found that catechol decomposition is initiated dominantly via hydroxyl H migration to a neighboring ortho carbon bearing an H atom. We identify the direct formation of o-benzoquinone to be unimportant at all temperatures, consistent with the absence of this species from experimental measurements. At temperatures higher than 1000 K, water elimination through concerted expulsion of a hydroxyl OH together with an ortho H becomes the most significant channel. Rice-Ramsperger-Kassel-Marcus simulations are performed to establish the branching ratio between these two important channels as a function of temperature and pressure. All unimolecular routes to the reported major experimental products (CO, 1,3-C(4)H(6) and cyclo-C(5)H(6)) are shown to incur large activation barriers. The results presented herein should be instrumental in gaining a better understanding of the decomposition behavior of catechol-related compounds.

No abstract

Titanium dioxide (TiO 2 ) materials have been the focus of many promising applications due to their low-cost, availability and biocompatible properties. In this study, mesoporous anatase TiO 2 nanoparticles were synthesised using a green chemistry approach. This visible-light active photocatalyst was prepared via a simple and solvent free precipitation method at low temperatures using titanium tetraisopropoxide (TTIP) as a precursor and soluble starch as the template. The effect of initial solution pH and concentration of TTIP on surface morphology and photocatalytic activities of TiO 2 nanoparticles were evaluated. Based on the results obtained, the TiO 2 nanocatalyst prepared using 0.01 mol of TTIP under basic conditions revealed the best photocatalytic activity. The as-synthesised nanoparticles were further characterised using X-ray powder diffraction (XRD), scanning electron microscopy (SEM) and nitrogen adsorption analysis (NAA). The XRD spectrum confirmed that the catalyst was composed of anatase tetragonal TiO 2 phase. The Brunauer-Emmett-Teller (BET) surface area of 81.59 m 2 g À1 proved the presence of mesopores (average pore size ¼ 8.7 nm) which partially contributed to and catalysed the photodegradation process of methylene blue (MB) solution under sunlight. The effects of various parameters such as initial dye concentration, catalyst dosage and recyclability of the catalyst were evaluated to determine the best conditions. Results obtained suggest that TiO 2 nanoparticles synthesised through the green chemistry approach under optimum conditions exhibited an effective photodegradation process of MB solution under sunlight.

An important step in the initial oxidation of hydrocarbons is the abstraction of H by hydroperoxyl radical (H0 2 ). In this study, reaction rate constants are derived for H abstraction by H0 2 from the weakest H bond in methanol, ethenol, acetaldehyde, toluene and phenol. Rate constants are provided in the simple Arrhenius form. Reasonable agreement was obtained with the limited literature data available for acetaldehyde and toluene. For the case of phenol, direct abstraction of the hydroxyl H was found to dominate over H0 2 addition to the ring. The results presented herein should be useful in modelling the lower temperature oxidation of the five compounds considered.

This study presents a detailed mechanistic and kinetic investigation that explains the experimentally observed high yields of formation of polybrominated dibenzo-p-dioxins and dibenzofurans (PBDD/Fs) from the polybrominated diphenyl ethers (PBDEs), commonly deployed in brominated flame retardants (BFRs). Theoretical calculations involved the accurate meta hybrid functional of M05-2X. The previously suggested pathways of debromination and generation of bromophenols/bromophenoxys/bromobenzenes were found to be unimportant corridors for the formation of PBDD/Fs. A loss of an ortho Br or H atom from PBDEs, followed by a ring-closure reaction, is the most accessible pathway for the production of PBDFs via modest reaction barriers. The initially formed peroxy-type adduct (RO₂) is found to evolve in a complex, nevertheless very exoergic, mechanism to produce PBDDs. Results indicate that, degree and pattern of bromination, in the vicinity of the ether oxygen bridge, has a minor influence on governing mechanisms and that even fully brominated isomers of BFRs are capable of forming PBDD/Fs. We thoroughly discuss bimolecular reactions of PBDEs with Br and H, as well as the Br-displacement reaction by triplet oxygen. The rate of the Br-displacement reaction significantly exceeds that of the unimolecular inititiation reactions due to loss of ortho Br or H. Results presented herein address conclusively the intriguing question of how PBDEs form PBDD/Fs, a matter that has been in the center of much debate among environmental chemists.

This study investigates the kinetic parameters of the formation of the chlorophenoxy radical from the 2-chlorophenol molecule, a key precursor to polychlorinated dibenzo-p-dioxins and dibenzofurans (PCCD/F), in unimolecular and bimolecular reactions in the gas phase. The study develops the reaction potential energy surface for the unimolecular decomposition of 2-chlorophenol. The migration of the phenolic hydrogen to the ortho-C bearing the hydrogen atom produces 2-chlorocyclohexa-2,4-dienone through an activation barrier of 73.6 kcal/mol (0 K). This route holds more importance than the direct fission of Cl or the phenolic H. Reaction rate constants for the bimolecular reactions, 2-chlorophenol + X --> X-H + 2-chlorophenoxy (X = H, OH, Cl, O2) are calculated and compared with the available experimental kinetics for the analogous reactions of X with phenol. OH reaction with 2-chlorophenol produces 2-chlorophenoxy by direct abstraction rather than through addition and subsequent water elimination. The results of the present study will find applications in the construction of detailed kinetic models describing the formation of PCDD/F in the gas phase.