No abstract

Position control in electrical drives is a challenging problem which is complicated by sensor noise and unknown disturbances. This paper proposes a new cascade sensorless speed control technique for induction motor drives suitable for electric vehicle applications using the full-order adaptive Luenberger observer that is insensitive to measurement noise and parametric variation. The adaptive speed law is obtained by the Lyapunov method using the estimated currents and fluxes. This technique ensures the stability of the induction motor considered as nonlinear dynamic system. Since the Luenberger observer works on deterministic environment, and it is most effective when sensor noise is limited, the present study aims to design a robust observer insensitive to measurement noise and parametric variation integrated in a cascade structure. The observer allows the filtering of the measured currents. To highlight the advantages of the new scheme, a comparative study and spectrum analysis will be presented. The proposed structure is verified using MATLAB/Simulink.

This study proposes the speed control of an asynchronous motor (AM) using the Antiwindup design. First, the conventional vector control based on proportional-integral (PI) controllers is developed for a constant speed set point. Then, a driving cycle is based on measurements on the Safi/Rabat motorway in Morocco using a microcontroller equipped with a GPS device. The collected practical speed is used as a speed reference for conventional vector control. The /Antiwindup controller of the direct rotor flow-oriented control is used to improve the performance of conventional vector control and optimize the energy consumption of the drive train. The effectiveness of the proposed control scheme is verified by numerical simulation. The results of the numerical validation of the proposed scheme showed good performance compared to conventional vector control. The speed control systems are analyzed for different operating conditions. These control strategies are simulated in the MATLAB/SIMULINK environment. The simulation results of the improved vector control of the Asynchronous Machine (AM) are used to validate this optimization approach in the dynamic regime, followed by a comparative analysis to evaluate the performance and effectiveness of the proposed approach. A practical model based on a TMS320F28379D embedded board and its reduced voltage inverter (24V) is used to implement the proposed method and verify the simulation results. Doi: 10.28991/ESJ-2022-06-04-012 Full Text: PDF

No abstract

Appropriate control contributes essentially in the design of efficient DC-DC converters. With this intention, a study deals with the synthesis of a controller for DC-DC Three-levelBoost converter (TLBC), has been addressed. The studied TLBC, known as nonlinear system, has been locally modeled using transfer function models. For instance, PI controllers were designed using the local models, and then they were combined using Takagi-Sugeno fuzzy (TSF) approach to form a TSF-PI controller. Simulation tests show the flexibility of the proposed controller, its rejection capability to different disturbances, and its ability to achieve the performance specification overall the wide operating range of the system.

No abstract

No abstract

No abstract