No abstract

No abstract

Engine and car manufacturers are experiencing the demand concerning fuel efficiency and low emissions from both consumers and governments. Homogeneous charge compression ignition (HCCI) is an alternative combustion technology that is cleaner and more efficient than the other types of combustion. Although the thermal efficiency andNOxemission of HCCI engine are greater in comparison with traditional engines, HCCI combustion has several main difficulties such as controlling of ignition timing, limited power output, and weak cold-start capability. In this study a literature review on HCCI engine has been performed and HCCI challenges and proposed solutions have been investigated from the point view ofIgnition Timingthat is the main problem of this engine. HCCI challenges are investigated by many IC engine researchers during the last decade, but practical solutions have not been presented for a fully HCCI engine. Some of the solutions are slow response time and some of them are technically difficult to implement. So it seems that fully HCCI engine needs more investigation to meet its mass-production and the future research and application should be considered as part of an effort to achieve low-temperature combustion in a wide range of operating conditions in an IC engine.

Homogeneous charge compression ignition (HCCI) combustion, when applied to a gasoline engine, offers the potential for a noticeable improvement in fuel economy and dramatic reductions in NOx emissions. In this study, Computational Fluid Dynamic (CFD) is used coupled with detailed chemical mechanism (38 species and 69 reactions) for simulation of HCCI combustion of iso-octane and transitional flow inside the combustion chamber of a 2-stroke engine. Results show that increasing the overall gas temperature significantly advances the HCCI combustion timing. Concerning the equivalence ratio, by increasing it the ignition timing has been advanced and the maximum cylinder pressure has been increased. When equivalence ratio increases to more than 0.5 , NOx emissions significantly increases and go beyond 1000 [ppm].

This study demonstrates the combustion stratification from conventional compression ignition (CI) combustion to partially premixed combustion (PPC). Experiments are performed in an optical CI engine at a speed of 1200 rpm for diesel and naphtha (RON = 46). The motored pressure at TDC is maintained at 35 bar and fuelMEP is kept constant at 5.1 bar to account for the difference in fuel properties between naphtha and diesel. Single injection strategy is employed and the fuel is injected at a pressure of 800 bar. Photron FASTCAM SA4 that captures in-cylinder combustion at the rate of 10000 frames per second is employed. The captured high speed video is processed to study the combustion homogeneity based on an algorithm reported in previous studies.Starting from late fuel injection timings, combustion stratification is investigated by advancing the fuel injection timings. For late start of injection (SOI), a direct link between SOI and combustion phasing is noticed. At early SOI, combustion phasing depends on both intake air temperature and SOI. In order to match the combustion phasing (CA50) of diesel, the intake air temperature is increased to 90°C for naphtha. The combustion stratification from CI to PPC is also investigated for various level of dilution by displacing oxygen with nitrogen in the intake. The start of combustion (SOC) was delayed with the increase in dilution and to compensate for this, the intake air temperature is increased. The mixture homogeneity is enhanced for higher dilution due to longer ignition delay. The results show that high speed image is initially blue and then turned yellow, indicating soot formation and oxidation. The luminosity of combustion images decreases with early SOI and increased dilution. The images are processed to generate the level of stratification based on the image intensity. The level of stratification is same for diesel and naphtha at various SOI. When O 2 concentration in the intake is decreased to 17.7% and 14.7%, stratification level is decreased. NO X emission for both diesel and naphtha show a decreasing trend from CI to PPC.Comparing diesel and naphtha, the soot emission is lower for naphtha. NO X and soot emissions at various SOI are correlated with high speed images of combustion to explain the combustion stratification.

No abstract

No abstract

No abstract